{"title":"Air \u0026 Dirt Separators","description":"","products":[{"product_id":"hfprodad","title":"Fabricated Products Air Dirt Seperator","description":"\u003cp\u003e\u003cstrong\u003eFabricated Products\u003c\/strong\u003e manufacture two ranges of Microbubble Air \u0026amp; Dirt Separators. \u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eThe CleanVent range and the MagVent range for the removal of Air, Dirt, Magnetite and Sludge. \u003c\/span\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eFabricated Products also manufacture Chemical Dosing Pots, Water Sample Coolers, Buffer Vessels and Hydronic Headers. \u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003e\u003cbr\u003eModern boilers have very low water content, making them vulnerable to accumulated deposits (dirt) causing boiler failure. The main reason for appliance breakdown is this dirty water. The water that circulates around any heating (or cooling) system will be contaminated with a variety of damaging debris, including magnetite (which turns to sludge).\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eSuch contamination is always damaging to a heating\/cooling system, but to the latest generation of high-output, low water-content appliances, dirty water is a major hazard. System cleansing and water treatment is now very vital and necessary to the welfare and prolonged existence of the boiler\/chiller plant.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAir Separation \u0026amp; Air and Dirt Separation:\u003cbr\u003e\u003c\/strong\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eBoth these units must be installed at the hottest part of the system (before the pumps). In a heating system this is the main flow from the boilers. In a chilled water system the unit must be located in the return close to the chiller.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirt Separation only:\u003cbr\u003eT\u003c\/strong\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003ehis unit should be installed in the return pipework before the flow of water enters any plant (boilers, pumps, etc.). There is no head restriction on this unit. The maximum flow rates through the SS range of MagVent \u0026amp; CleanVent is 3m\/sec. If these values are exceeded the efficiency is reduced.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eCommissioning:\u003cbr\u003e\u003c\/strong\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003eThe SS CleanVent and SS MagVent require no special commissioning. All units are fitted with a 3 way valve under the auto air vent valve, which should be used when initially filling the system. The same valve is used for draining off floating “scum” that prevents the possibility of dirt clogging the air vent. Maintenance will be required to remove trapped dirt and sludge.\u003c\/span\u003e\u003c\/p\u003e\u003cul data-mce-style=\"list-style-type: disc;\" style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eAll flanges are drilled to BS 4504 PN16 as standard. Plain ends and other flange ratings are available on request. The SS CleanVent unit is maintenance free.\u003c\/li\u003e\n\u003cli\u003eDrain Valve, all models are supplied with a ball valve for draining the collected dirt and sludge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan data-mce-style=\"line-height: 1.4em;\" style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Fabricated Products","offers":[{"title":"Default Title","offer_id":52356749492563,"sku":"HFPRODAD","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HFPRODAD___L.jpg?v=1762940664"},{"product_id":"hfp1pass","title":"Fabricated Products 1Pass","description":"\u003cp\u003e\u003cstrong\u003eHFP1PASS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFabricated Products\u003c\/strong\u003e 1 Pass a combined air dearatory and dirt separator, designed for the removal of Air, Dirt, Magnetite and Sludge in a single pass.\u003c\/p\u003e\n\u003cp\u003eThe 1 Pass unit provides the removal of 99% of Air \u0026amp; Dirt through a single unit in just one pass.\u003c\/p\u003e\n\u003cp\u003eThe word Dearation describes the removal of dissolved gases from liquids such as air from water. When water is heated or the pressure reduced, gas microbubbles are released into the system. Microbubbles can be the cause of major problems such as pump failure, corrosion and energy loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Solution:\u003c\/strong\u003e\u003cbr\u003eThe 1Pass combines the removal of air and dirt through a single unit. Installed at the hottest point in the system, the 1Pass will eliminate these microbubbles from heating and chilled water systems.\u003c\/p\u003e\n\u003cp\u003eThe special design of the filter ensures all dirt including magnetite down to 2\/3 micron and less are removed.\u003c\/p\u003e\n\u003cp\u003eAll magnetite and any other debris will be quickly removed, minimising the amount of time that the dirt will be in the water system concerned.\u003c\/p\u003e\n\u003cp\u003eModern boilers have very low water content, making them vulnerable to accumulated deposits (dirt) causing boiler failure. The main reason for appliance breakdown is this dirty water. The water that circulates around any heating (or cooling) system will be contaminated with a variety of damaging debris, including magnetite (which turns to sludge).\u003cbr\u003e\u003cbr\u003eSuch contamination is always damaging to a heating\/cooling system, but to the latest generation of high-output, low water-content appliances, dirty water is a major hazard. System cleansing and water treatment is now very vital and necessary to the welfare and prolonged existence of the boiler\/chiller plant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir Separation \u0026amp; Air and Dirt Separation:\u003cbr\u003e\u003c\/strong\u003eBoth these units must be installed at the hottest part of the system (before the pumps). In a heating system this is the main flow from the boilers. In a chilled water system the unit must be located in the return close to the chiller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirt Separation only:\u003cbr\u003eT\u003c\/strong\u003ehis unit should be installed in the return pipework before the flow of water enters any plant (boilers, pumps, etc.). There is no head restriction on this unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommissioning:\u003cbr\u003e\u003c\/strong\u003eThe 1 Pass unit requires no special commissioning. All units are fitted with a 3 way valve under the auto air vent valve, which should be used when initially filling the system. The same valve is used for draining off floating scum that prevents the possibility of dirt clogging the air vent. Maintenance will be required to remove trapped dirt and sludge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll flanges are drilled to BS 4504 PN16 as standard. Plain ends and other flange ratings are available on request. The SS CleanVent unit is maintenance free.\u003c\/li\u003e\n\u003cli\u003eDrain Valve, all models are supplied with a ball valve for draining the collected dirt and sludge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12.8px; line-height: 1.4em;\"\u003eFabricated Products also manufacture Chemical Dosing Pots, Water Sample Coolers, Buffer Vessels and Hydronic Headers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Fabricated Products","offers":[{"title":"Default Title","offer_id":52356749525331,"sku":"HFP1PASS","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HFP1PASS___L.jpg?v=1762940666"},{"product_id":"hfphh","title":"Fabricated Products Hydraunic Headers","description":"\u003cp\u003eFabricated Product Hydronic Headers\u003c\/p\u003e\n\u003cp\u003eHydronic Balancing is the process of optimizing the distribution of water in a buildings heating or cooling system so it provides the intended indoor climate at optimum energy and minimal operating cost.\u003cbr\u003eA well balanced hydraulic water system is highly important for HVAC and process systems with separated circuits or several groups and pumps. The successful removal of air and dirt also contributes towards the achievement of optimum system performance. Hydraulic balancing and air and dirt separation are combined in the Hydronic Header.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eThe Hydronic Header can be used for both new build and for renovating heating, cooling and process systems.\u003c\/li\u003e\n\u003cli\u003eTrapped dirt can be discharged while the system is in operation.\u003c\/li\u003e\n\u003cli\u003eThe Hydronic Header is suitable for water and water\/glycol mixtures (max 50%).\u003c\/li\u003e\n\u003cli\u003eThe standard Hydronic Header is suitable for a temperature range of 0 to 110°C and for an operating pressure of 0 to 10 bar. The flange connection is PN16.\u003c\/li\u003e\n\u003cli\u003eCustom made solutions available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabricated Products","offers":[{"title":"Default Title","offer_id":52356749558099,"sku":"HFPHH","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HFPHH___L.jpg?v=1762940667"},{"product_id":"hwcarus","title":"Wilo Carus Super","description":"\u003ch1\u003e\n\u003cstrong\u003eWilo Carus - Automatic air vent\u003c\/strong\u003e \u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eThe cap of the Wilo-Carus Super is conical in shape. The advantage of this construction is that the clearance between the water level and venting valve is maximized.  The air escape duct can be opened or closed with an adjusting screw.  The venting valve forms an integral part of the cap, so that it is impossible to damage the float vent mechanism from outside.  Suitable for addition of glycol-based anti-freeze up to 50 %. Minimum\/maximum working temperature: -10 °C \/ 120 °C.  Minimum\/maximum working pressure: 0.2 \/ 10.0 bar.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe Cairus Airvent unit is designed for air or gas venting in domestic and commercial closed heating and chilled water circuits. The air-venting unit discharges air bubbles continuously and has to be installed at the highest position in the system.\u003cspan style=\"font-size: 12.8px;\"\u003eThanks to the high efficient type of float venting units the system efficiency, service life of pumps, control devices and valves will be considerably extended.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eYour advantages:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigher efficiency of the heating and chilled water system thanks to the intelligent open closed principle of the float valve\u003c\/li\u003e\n\u003cli\u003eHigh reliability and less maintenance by removing free air out of the system\u003c\/li\u003e\n\u003cli\u003eReduced noise level thanks to efficient air venting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eContinuous air venting:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eWilo-Carus Air vent is the ideal solution to provide continuous air venting of closed heating and chilled water circuits in domestic and small commercial buildings. The design with protective cap and the expansion sealer rings on the one hand prevents leakages and on the other hand the long distance between the water and the closing mechanism reduces the possibility of contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eAutomatic air vent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eFor air or gas venting in domestic and commercial closed heating and chilled water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eType key:\u003c\/h3\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eExample\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCarus Airvent R 3\/8M\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarus Airvent\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFamily name automatic air vent\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eR 3\/8M\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eConnection\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eAir venting housing: Brass\u003c\/li\u003e\n\u003cli\u003eCap at the top: Plastic\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wilo","offers":[{"title":"Default Title","offer_id":52356749590867,"sku":"HWCARUS","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HWCARUS___L.jpg?v=1762940668"},{"product_id":"hwvodaad","title":"Wilo Voda Air\/Dirt Seperator","description":"\u003cp\u003e\u003cstrong\u003eWilo-Voda Air\/Dirt 50-200F (PN10) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOptimum air and dirt separation combined with energy efficiency \u003cspan style=\"font-size: 12.8px;\"\u003eAir and dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles, increase comfort and improve the yield. Air and dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system. \u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eSeparator constructed in steel with Dual Zone Flow Diversion technology.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWilo-Voda Air \/ Dirt is the ideal solution for continuous purging and de-fouling of closed heating and cooling water circuits in commercial buildings. \u003c\/span\u003e\u003cspan\u003eThe combined functions of the air and dirt separator protect the boiler, pumps and pipe connections of large sealed heating and cooling water installations. \u003c\/span\u003e\u003cspan\u003eThey eliminate, on the one hand, all of the air and, on the other hand, the deposits of polluted particles present in the water of the installation and therefore extend the service life of pumps, control devices and more. system accessory. \u003c\/span\u003e\u003cspan\u003eWilo-Voda Air and Dirt offer additional advantages when used in older generation systems or when converting an open system to a closed system.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003ePrevents deposit of dirt particles in the boiler.\u003c\/li\u003e\n\u003cli\u003eThe removal of dirt particles from the system water extends the service life of pumps, control equipment and other system accessories.\u003c\/li\u003e\n\u003cli\u003eWith flanged connection according to EN 1092-1 PN16.\u003c\/li\u003e\n\u003cli\u003eIntegrated dirt scraper with magnet attraction for high efficient separation.\u003c\/li\u003e\n\u003cli\u003eConstant performance during the entire lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eLow maintenance. Maximum working pressure: 10 bar.\u003c\/li\u003e\n\u003cli\u003eSuitable for systems with a maximum flow temperature of 120 °C.\u003c\/li\u003e\n\u003cli\u003eMaximum flow velocity: 1.5 m\/s.\u003c\/li\u003e\n\u003cli\u003eSuitable for addition of glycol-based anti-freeze up to 50%.\u003c\/li\u003e\n\u003cli\u003eIn accordance with Pressure Equipment Directive 2014\/68\/EU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cstrong\u003eYour advantages:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"arrow-list\"\u003e\n\u003cli\u003e\u003cspan\u003eHigher efficiency of heating and cooling water systems thanks to the intelligent open-close principle of the float valve\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigher reliability and reduced maintenance of all pump and boiler system components thanks to the removal of exhaust air and polluted particles from the system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple and efficient dismantling, including magnetic particles for flanged variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReduction of the sound level thanks to the efficiency of the purge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll-in-one solution thanks to the combined functions of degassing and cleaning\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAir and dirt separator.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong style=\"font-size: 16px;\"\u003eTechnical characteristics:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"information-block\"\u003e\n\u003cul class=\"arrow-list\"\u003e\n\u003cli\u003e\u003cspan\u003eMaximum working pressure: 10 bar\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum working temperature: 120 ° C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum flow speed: 1.5 m \/ s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended for the addition of up to 50% glycol-based antifreeze agent\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Wilo","offers":[{"title":"Default Title","offer_id":52356749623635,"sku":"HWVODAAD","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HWVODAAD___L.jpg?v=1762940669"},{"product_id":"hwsinum","title":"Wilo Sinum","description":"\u003cp\u003e\u003cstrong\u003eWilo Sinum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstant pressure with continuous degassing and topping-up.\u003c\/p\u003e\n\u003cp\u003eWilo-Sinum is the ideal solution for pressurization, de-aeration and topping up in sealed heating installations where standard diaphragm expansion equipment is limited. The pressure expansion automat for pumps includes an integrated pressure retention, degassing and topping-up in enclosed heating and cooling systems. The large series of closed vessel sizes allows adaptation to a large number of applications for guaranteeing constant system pressure. The system offers continuous degassing using three selectable operation modes and thanks to the digital and analogue inputs, it can be optimally integrated into an existing building management system. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdvantages:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation thanks to intuitive menu navigation in the HMI, large display and self-learning microprocessor\u003c\/li\u003e\n\u003cli\u003eDifferent operating modes guarantee continuous degassing\u003c\/li\u003e\n\u003cli\u003eAdvanced technology ensures low power consumption, long service life and easy maintenance\u003c\/li\u003e\n\u003cli\u003eHigh convenience through volumetric controls and automatic topping-up during the heating and cooling cycles\u003c\/li\u003e\n\u003cli\u003eModular design for a high level of installation flexibility\u003c\/li\u003e\n\u003cli\u003eOptional: Integration in existing building management systems through digital and analogue outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum system pressure: 6, 10 and 16 bar.\u003c\/li\u003e\n\u003cli\u003eWorking temperature: 3 °C \/ 70 °C.\u003c\/li\u003e\n\u003cli\u003eSuitable for addition of glycol-based anti-freeze up to 50%.\u003c\/li\u003e\n\u003cli\u003eIn accordance with Machinery Directive 2006\/42\/EC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConstruction:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBalanced pressure expansion equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSealed heating installations (acc. to EN12828)\u003c\/li\u003e\n\u003cli\u003eChilled water (cooling) installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wilo","offers":[{"title":"Default Title","offer_id":52356749656403,"sku":"HWSinum","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HWSINUM___L.jpg?v=1762940670"}],"url":"https:\/\/hevac.ie\/collections\/air-dirt-separators.oembed","provider":"Hevac Limited","version":"1.0","type":"link"}