{"title":"Boilers","description":"","products":[{"product_id":"hhamworthypowerstock","title":"Hamworthy Powerstock","description":"\u003cp\u003eThe Powerstock calorifier delivers imdirect hot water generation with continious high outputs. The twin coil design (models PS300 to PS1000 only) makes it perfect for use with solar thermal solution or other alternative heat sources. Wate Regulations Advisory Scheme (WRAS) approve, they comply with the water supply (water fittings) regulations 1999.\u003c\/p\u003e\n\u003cp\u003eThe Powerstock calorifier range consists of 7 models, with a storage capacities ranging from 157 to 9725 litres and a continious output from 501 l\/h up to 1635 l\/h. Powerstock storage tanks  are available in 4 models with capacities ranging from 301 to 981 litres. All models have a glass lined vessel, a large inspection \/ clean out door and a screwed drain connection.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eCylinders constructed from high grade steel with high quality vitreous enamel lining\u003c\/li\u003e\n\u003cli\u003eCalorifier models PS300 to PS1000 feature twin coils for independent external heat sources\u003c\/li\u003e\n\u003cli\u003eCE and WRAS approved\u003c\/li\u003e\n\u003cli\u003eComplies with Health \u0026amp; Safety Commission (HSC) approved code of practice for the prevention of Legionella\u003c\/li\u003e\n\u003cli\u003eSupplied with pre-wired contol panelwith temperature control and limit thermostat\u003c\/li\u003e\n\u003cli\u003eAdaptable to match load demand\u003c\/li\u003e\n\u003cli\u003eMagnesium sacrificial anode for corrision protection\u003c\/li\u003e\n\u003cli\u003eClean out door for inspection and easy cleaning\u003c\/li\u003e\n\u003cli\u003eFactory fitted polyurethane foam insulation jacket to minimise standby losses\u003c\/li\u003e\n\u003cli\u003eAdjustable feet for easy leveling\u003c\/li\u003e\n\u003cli\u003e10 bar pressure rated\u003c\/li\u003e\n\u003cli\u003eOptional lits for un-vented supply, top to bottom recirculation, electrical anode protetion, and electric immersion heater\u003c\/li\u003e\n\u003cli\u003eParmetric 3D BIM (Building Information Modelling), models for all Powerstock calorifiers are available from Hamworthy's website: \u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" rel=\"noopener\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351036883283,"sku":"HHamworthyPowerstock","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYPOWERSTOCK___L.jpg?v=1762863678"},{"product_id":"hhamworthywessex","title":"Hamworthy Wessex Modumax","description":"\u003cp\u003eWessex ModuMax is a compact, floor standing, high efficiency condensing boiler range with up to 95% gross seasonal efficiency.\u003c\/p\u003e\n\u003cp\u003eAll models feature the latest fully modulating burner technology with 100% to 20% modulation on each module, and hot surface ignition with 120V power transformer.\u003c\/p\u003e\n\u003cp\u003eThe Wessex ModuMax mk3 is available in individual condensing boiler modules of 97 kW, 116 kW, 147 kW, 196 kW and 254 kW and in a choice of one, two or three-modules high pre-assembled boiler stacks, giving 15 combinations of like powered modules. This effectively offers 13 output power options ranging from 97 kW up to 762 kW.\u003c\/p\u003e\n\u003cp\u003eThe heat exchanger is manufactured in high grade stainless steel to provide protection against condensate and corrosion. Each module is designed to operate continuously at up to 40 °C delta T differential temperature rise across the module, maximising condensing operation. The mk3 upgrade of the boiler has been developed in direct response to the increased use of wider delta T design methodologies in commercial buildings and district heating systems.\u003c\/p\u003e\n\u003cp\u003eWessex ModuMax mk3 boilers feature modern controls and use a LPB (Local Process Bus) communication system. Clip-in modules allow boiler controls to be integrated with building control systems. Sequencing for up to 16 boilers in a multiple boiler installation is achievable via Merley sequence controller option, or by using the built in master\/slave cascade control.\u003c\/p\u003e\n\u003cp\u003eCompleting the Wessex ModuMax package is a range of optional pipe kits that simplify design and installation. The variety of kits is available for 2 or 3 modules and factory tested and assembled for ease of installation.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eHigh efficiency, compact condensing boiler with up to 95% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eSpace saving design (\u0026lt;1m² of floor space) with stacking modules two or three high\u003c\/li\u003e\n\u003cli\u003eLightweight, ideal for roof top or packaged plant rooms\u003c\/li\u003e\n\u003cli\u003eLow water content to enable rapid response to heat demand\u003c\/li\u003e\n\u003cli\u003eFully modulating burner for close load matching\u003c\/li\u003e\n\u003cli\u003eUltra-low standing losses (\u0026lt;1%)\u003c\/li\u003e\n\u003cli\u003eOptional pipe kits to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eRange of control options for complete system integration\u003c\/li\u003e\n\u003cli\u003eDesigned for 10 bar water pressure\u003c\/li\u003e\n\u003cli\u003eWatertight combustion chambers to retain condensate\u003c\/li\u003e\n\u003cli\u003eTri-lip silicone seal fitted to flue connections\u003c\/li\u003e\n\u003cli\u003eEuropean Class 5 performance for NOx emissions (\u0026lt;40mg\/kWh)\u003c\/li\u003e\n\u003cli\u003eOptional volt free contacts and 0-10V signal standard on all models\u003c\/li\u003e\n\u003cli\u003eDelivered fully assembled and can pass through standard doorway\u003c\/li\u003e\n\u003cli\u003eLPG and natural gas compatible options\u003c\/li\u003e\n\u003cli\u003eBMS compatible\u003c\/li\u003e\n\u003cli\u003eParametric 3D BIM (Building Information Modelling) models for all Wessex ModuMax mk3 boilers are available from Hamworthy website: \u003cbr\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e\u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037014355,"sku":"HHamworthyWessex","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYWESSEX___L.jpg?v=1762863680"},{"product_id":"hdedietricheco2","title":"De Dietrich Eco C230","description":"\u003cp\u003eDe Dietrich ECO C230 range of floor standing modulating condensing gas boiler. Fitted to operate on Natural Gas (20mbar) or Propane with conversion kit. Annual operating efficiency up to 100%. Low NOX\u003c\/p\u003e\n\u003cp\u003eMax Boiler Output @ 50\/30 deg C:\u003cbr\u003eECO C230: boiler from 93 to 217 kW\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eFloor-standing gas condensing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFactory setting on \u003cstrong\u003enatural gas or on propane \u003c\/strong\u003ewith conversion kit (option)\u003c\/li\u003e\n\u003cli\u003eAnnual efficiency up to 109%\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow pollutant emissions:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eNOx \u0026lt; 62 mg\/kWh, CO \u0026lt; 19 mg\/kWh\u003c\/li\u003e\n\u003cli\u003eDimensions on the ground reduced (0.54 m2)\u003c\/li\u003e\n\u003cli\u003eBoiler \u003cstrong\u003efitted and tested in the factory\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeat exchanger in cast aluminium\/silicium sections.\u003c\/li\u003e\n\u003cli\u003eBurner with premixing modulation from 18 to 100%.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChoice of 2 control panels:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDIEMATIC-m 3 with programmable electronic control system based on the outside temperature; can also be used in cascade of up 10 boilers\u003c\/li\u003e\n\u003cli\u003eK3 only in association with DIEMATIC-m 3 to control the other boilers (see p. 140)\u003c\/li\u003e\n\u003cli\u003eOption for connection with horizontal or vertical air\/flue gas vent (homologations C13x or C33) or to a chimney (B23 and B23P)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":52351037178195,"sku":"HDEDIETRICHECO2","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HDEDIETRICHECO2___L.jpg?v=1762863680"},{"product_id":"hdedietricheco","title":"De Dietrich Eco C330\/C630","description":"\u003cp\u003eDe Dietrich ECO C330\/C630 range of floor standing modulating condensing gas boiler. Fitted to operate on Natural Gas (20mbar) * Annual operating efficiency up to 100%. * Low NOX\u003c\/p\u003e\u003cp\u003eMax Boiler Output @ 50\/30 deg C:\u003cbr\u003e ECO C330: boiler from 279 to 651 kW \u003cbr\u003e ECO C630: boiler from 558 to 1303 kW\u003c\/p\u003e\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eFloor-standing gas condensing boiler, single or double body\u003c\/li\u003e\n\u003cli\u003eFitted to operate on natural gas only.\u003c\/li\u003e\n\u003cli\u003eGas supply pressure: 20 mbar or 300 mbar with pressure regulator (optional)\u003c\/li\u003e\n\u003cli\u003eAnnual operating efficiency \u0026gt; 109%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow pollutant emissions: \u003c\/strong\u003eNOx \u0026lt; 60 mg\/kWh, CO \u0026lt; 20 mg\/kWh\u003c\/li\u003e\n\u003cli\u003eLow noise level and electricity consumption thanks to the modulating fan\u003c\/li\u003e\n\u003cli\u003eExchanger in cast aluminium\/silicium components with self-cleaning properties and with inspection trap\u003c\/li\u003e\n\u003cli\u003eTotal pre-mix burner, modulating from \u003cstrong\u003e15 to 100% in output \u003c\/strong\u003efor perfect adjustment of boiler output to the actual needs of the installation and optimal combustion quality over the entire output range thanks to the constant air\/gas ratio by venturi system\u003c\/li\u003e\n\u003cli\u003eElectronic ignition\u003c\/li\u003e\n\u003cli\u003eIonisation sensor\u003c\/li\u003e\n\u003cli\u003eFlue gas collector provided\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDIEMATIC iSystem + iniControl control systems or 2 x iniControl or 2 x DIEMATIC iSystem \u003c\/strong\u003eon which regulation is open to all installation configurations, even the most complex: cascade operation possible with 2 and up to 5 boilers, numerous control panel and connection configuration options, which enable the management of external safety devices, modulating pumps, systems combined with solar energy or heat pumps and the programmed control of heating circuits with mixing valves. It is designed to communicate with DIEMATIC VM iSystem control systems and with teleprocessing systems compatible with the ModBus protocol.\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"line-height: 1.4em;\"\u003eC630 Delivered in 2 units fully assembled and tested in the factory:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlue gas valve integrated in the combustion line prevents any interference with the discharge of the flue gases between the 2 generators that compose it and thus facilitates cascade installation.\u003cbr\u003e Optional separation of the returns possible\u003c\/p\u003e\u003cul style=\"list-style-type: disc;\"\u003e\u003cli\u003eProvided with \u003cstrong\u003ecasters + guide rail for easy installation into the boiler room\u003c\/strong\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":52351037276499,"sku":"HDEDIETRICHECO","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HDEDIETRICHECO___L.jpg?v=1762863681"},{"product_id":"hhamworthypurewell","title":"Hamworthy Purewell Variheat","description":"\u003cp\u003eThe Purewell VariHeat is a cast iron condensing boiler that combines traditional durable build quality with modern ultra-efficient condensing boiler technology. The range consists of 5 models with outputs from 70 kW to 180 kW. The highly reliable cast iron heat exchanger is backed by Hamworthy 10-year cast iron warranty for additional peace of mind. The fully Energy-related Products Directive (ErP) compliant cast iron boiler is the only one of its kind in the UK. It achieves exceptional gross seasonal efficiency up to 96% with ultra-low emissions (European Class 5), while easily exceeding minimum seasonal efficiency requirements for new and existing buildings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallable as single or multiple boilers in modular arrangement, they are ideal to replace atmospheric boilers in existing heating systems. Thanks to modern controls and clip-in modules, the boilers can be integrated in building control systems. Additionally, the boiler can be installed with an optional cascade controller with reliable bus communications for boiler sequencing for up to 16 boilers.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eReliable and robust cast iron heat exchanger with 10-year warranty \u003cem\u003e(primary \u0026amp; secondary heat exchanger only, T\u0026amp;Cs apply)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eExceptionally efficient condensing technology with up to 108% net efficiency\u003c\/li\u003e\n\u003cli\u003eFully modulating boiler for close control and accurate load matching\u003c\/li\u003e\n\u003cli\u003eOnly ErP compliant cast iron commercial condensing boiler in the UK\u003c\/li\u003e\n\u003cli\u003eUltra-low NOx performance\u003c\/li\u003e\n\u003cli\u003eTolerant of older heating systems, replaces atmospheric boilers easily\u003c\/li\u003e\n\u003cli\u003eReduced cost of refurbishment\u003c\/li\u003e\n\u003cli\u003eComprehensive controls including optional boiler sequencing\u003c\/li\u003e\n\u003cli\u003eFull factory assembled for easier installation but for plant rooms with difficult access it can be supplied unassembled\u003c\/li\u003e\n\u003cli\u003ePipe kits available to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eParametric 3D BIM (Building Information Modelling) models for all Purewell VariHeat boilers are available from Hamworthyâ website:\u003cbr\u003e\u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" rel=\"noopener\" style=\"font-size: 12.8px;\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePipe kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo simplify design and procurement, Hamworthy provide a range of pipe kits for 2, 3 or 4 multiple boilers, which are factory tested and part assembled for ease of installation. The kits include:\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eIsolating ball valves for water flow, return and gas inlet connection on each boiler\u003c\/li\u003e\n\u003cli\u003eFlow and return headers\u003c\/li\u003e\n\u003cli\u003ePre-assembled flow and return pipe sub-assemblies between boilers and headers.\u003c\/li\u003e\n\u003cli\u003eFlow line safety relief valve and ½\" connection for pressure gauge\u003c\/li\u003e\n\u003cli\u003eReturn line drain valve and ½\" connection for expansion vessel in line with BS6644\u003c\/li\u003e\n\u003cli\u003eBlanking flanges for header ends\u003c\/li\u003e\n\u003cli\u003eSupport legs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037440339,"sku":"HHamworthyPurewell","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYPUREWELL___L.jpg?v=1762863682"},{"product_id":"hhamworthyupton","title":"Hamworthy Upton","description":"\u003cp\u003e\u003cstrong\u003eHAMWORTHY UPTON\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpton floor standing condensing modular boiler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eThe Upton is an ErP-compliant floor standing condensing modular boiler able to deliver an output of over 1MW from less than 1m² of footprint. It features a precision-engineered and resilient aluminium heat exchanger with quick heat up times and a gross seasonal efficiency of up to 97%. The boiler is available in 6 stackable modules with a turndown ratio of 5:1 with outputs ranging from 98 up to 348kW output. Single modules can be stacked vertically allowing up to 18 boiler module combinations. If stacked, the boiler turndown ratio increases from 5:1 to 15:1 for more accurate load matching and less energy wastage. All boiler modules benefit from identical water and gas connections (size and position) which allows for easy design changes if more output is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTogether with the Upton low NOx emissions (\u0026lt;40 mg\/kWh) and low noise levels, it is an ideal choice for restricted access city centre plant rooms or adjoining quiet areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe boiler modules can be stacked 1-, 2- or 3-high which offers flexible installation options for more challenging plant rooms. The built-in modern Siemens LMS platform allows control of cascade arrangements of up to 16 boiler modules.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eTested 6 bar rated precision-engineered aluminium heat exchanger with 5-year warranty\u003c\/li\u003e\n\u003cli\u003eUp to 97% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eOver 1MW output from less than 1m² of footprint\u003c\/li\u003e\n\u003cli\u003eFully modulating with a turndown ratio of 5:1 per module for accurate load matching\u003c\/li\u003e\n\u003cli\u003eLow NOx emissions (\u0026lt;40mg\/kWh)\u003c\/li\u003e\n\u003cli\u003eBuilt-in advanced sequence control for cascade arrangements of up to 16 boiler modules\u003c\/li\u003e\n\u003cli\u003eCombustion analysis and drain point at front of the boiler for easy servicing and system cleaning\u003c\/li\u003e\n\u003cli\u003eBoiler modules easy to separate and transport to point of use, even in difficult to access city centres\u003c\/li\u003e\n\u003cli\u003ePipework kits available to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eOptional low loss header with integrated air and dirt separator for increased system performance available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParametric 3D BIM (Building Information Modelling) models for all Upton boiler models are available from the Hamworthy website: \u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" target=\"_blank\"\u003ebuilding-information-modelling\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 12.8px;\"\u003ePipework kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifically designed pipework kits for the Upton are available. These include optional matched boiler pumps and allow cascade installations with an output of up to 4.2MW.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eFour sizes of factory assembled pipework kits available\u003cbr\u003eDN100 (100\/150kW) 12 modules 1.8MW  DN150 (200\/250kW) 12 modules 3.0MW  DN150* (300\/350kW) 6 modules 2.1MW (*with larger pump)  DN200 (300\/350kW) 12 modules 4.2MW\u003c\/li\u003e\n\u003cli\u003eGas manifold\u003c\/li\u003e\n\u003cli\u003eCondensate drain pipework\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eOptional matched pumps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eBoiler safety relief valves\u003c\/li\u003e\n\u003cli\u003eAutomatic air vents\u003c\/li\u003e\n\u003cli\u003eOptional blanking plate with tappings for system safety relief valve and pressurisation unit\u003c\/li\u003e\n\u003cli\u003eOptional low loss header with integrated air and dirt separator\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eOptional 3 port manifold extension\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eBuilt-in advanced Siemens LMS controls as standard\u003c\/li\u003e\n\u003cli\u003eBoiler sequencing cascade controller\u003c\/li\u003e\n\u003cli\u003eRoom \u0026amp; outside temperature sensors\u003c\/li\u003e\n\u003cli\u003eLPB bus communications modules\u003c\/li\u003e\n\u003cli\u003eDHW cylinder sensor kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037505875,"sku":"HHAMWORTHYUPTON","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYUPTON___L.jpg?v=1762863683"},{"product_id":"hhamworthyvarmax","title":"Hamworthy Varmax","description":"\u003cp\u003e\u003cstrong\u003eVarmax boiler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Varmax is a high output floor standing condensing boiler. A stainless steel fully welded heat exchanger makes it extremely tolerant to a wide range of system water conditions and gives it a long life.\u003c\/p\u003e\n\u003cp\u003eWith outputs ranging from 120kW to 637kW for single boilers, the Varmax boiler, featuring twin return connections, is ideally suited for split temperature systems and projects such as medium sized district heating schemes. Additional to 96% gross seasonal efficiency for cost-effectiveness, generous insulation assures standby losses are kept to a minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eNew larger models added November 2020\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e - The range consists of 10 single boilers with outputs (at 50\/30°C) of 127, 148, 191, 238, 290, 338, 415, 478, 558, 637kW.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high water capacity of the heat exchanger and being non-dependent on system flow allows operation with wide differential temperatures. This makes the Varmax not only efficient, but removes the need for a dedicated primary circuit, simplifying system design.\u003c\/p\u003e\n\u003cp\u003e5:1 turndown of the premix burners allows accurate load-matching to supply only the heat that is required. Along with a NOx emission lower than 40mg\/kWh, it far exceeds Energy Related Products Directive (ErP) criteria. A built-in flue gas non-return valve allows for easier flue system design whilst protecting from re-circulation of flue gases through non-firing boilers.\u003c\/p\u003e\n\u003cp\u003eComprehensive built in controls can manage multiple heating systems including domestic hot water cylinder and up to three independent heating circuits operating at different temperatures to one another. Multiple boiler control is possible without the need for an additional sequence control panel.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eDurable corrosion resistant stainless steel heat exchanger backed up by 5-year heat exchanger warranty (\u003cem\u003eT\u0026amp;Cs apply\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003eTolerant to a wide range of water conditions\u003c\/li\u003e\n\u003cli\u003eUp to 96% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eClose load matching with 5:1 turndown ratio\u003c\/li\u003e\n\u003cli\u003eLow environmental impact with NOx emissions \u0026lt;40mg\/kWh\u003c\/li\u003e\n\u003cli\u003eIdeal for medium sized district heating schemes and split temperature systems\u003c\/li\u003e\n\u003cli\u003eBuilt in Siemens controls platform with sequence control for up to 16 boilers, multiple heating circuits and hot water circuit using the master\/slave principle\u003c\/li\u003e\n\u003cli\u003eReversible control panel and quick release panels simplify service and maintenance\u003c\/li\u003e\n\u003cli\u003eNatural gas or LPG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptions\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eA large range of off the shelf flue options available\u003c\/li\u003e\n\u003cli\u003eRoom sealed and open flue solutions\u003c\/li\u003e\n\u003cli\u003eFlue header kits\u003c\/li\u003e\n\u003cli\u003eUnvented kits \u003c\/li\u003e\n\u003cli\u003eSingle and multiple boiler controls\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037604179,"sku":"HHAMWORTHYVARMAX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYVARMAX___L.jpg?v=1762863684"},{"product_id":"hicigreenox","title":"ICI Caldaie Greenox.E","description":"\u003cp\u003eThe GREENOx boiler is three pass, wet back, low thermal load generator, with passing flame combustion chamber, connectible to pressure air blast burners with gaseous fuel operation. The boiler is designed to be used in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 °C). 3 stars classification\u003c\/p\u003e\n\u003cp\u003eaccording to 92\/42\/EEC directive in compliance with 192\/05 and 311\/06 Legislative Decree requirements.\u003c\/p\u003e\n\u003cp\u003eStainless steel boiler body\u003c\/p\u003e\n\u003cp\u003eLarge volume combustion chamber for low heat load obtainment with front gas convey pass, passing flame, three pass, wet back horizontal combustion chamber (sustained by a completely submerged nozzle)\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eLaser cut tube plate holes.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates, fitted with special helical turbulators.\u003c\/li\u003e\n\u003cli\u003eBoiler casing with flow and return flanged connections, working device connections, inspection doors, all manufactured with approved welding procedures.\u003c\/li\u003e\n\u003cli\u003eHigh density, thick glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eFlat front door with reversible opening, inner high-insulating ceramic casing, pivoting on hinges, easily opened by perforated rings equipped with levers as to guarantee a perfect combustion gas seal and allow possible maintenance operations.\u003c\/li\u003e\n\u003cli\u003eFlat front door (with reversible opening for GREENOx.e 80 e GREENOx.e 90 models), inner high-insulating ceramic casing, pivoting on hinges, easily opened by perforated rings equipped with levers as to guarantee a perfect combustion gas seal and render possible service operations.\u003c\/li\u003e\n\u003cli\u003eFlat rear door, manufactured in high quality steel as to guarantee high heat resistance, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037735251,"sku":"HICIGREENOx","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIGREENOX___L.jpg?v=1762863685"},{"product_id":"hicimonolitegt","title":"ICI Caldaie Monolite Gt","description":"\u003cp\u003eAISI 316 Ti stainless steel, passing flame combustion chamber, vertical heat exchanger, condensing MONOLITE GT Boiler is able to produce hot water with a maximum temperature of 100 °C. Equipped with pre-mix, gas fuel burner with cylindrical, heat radiating body with low NOx emissions. In compliance with directives 90 \/396\/CEE (gas) - CEE 311\/06 (efficiency) label, 89 \/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e \u003cspan style=\"line-height: 1.4em;\"\u003eFrame composed out of steel vertical profile structure, complete with floor support.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eLarge cylindrical combustion chamber manufactured from AISI 316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eAISI 316 Ti anti acid stainless steel, vertical heat exchange surfaces, TIG welded, attached perpendicularly to the combustion chamber, consisting of stainless steel plates printed with special conformity specifications in order to increase heat exchange surface, and facilitate condensate droplet formation, allowing adequate drainage. Heat exchange surface vertical arrangement also facilitates condensate drainage, ensuring an effective plate self-cleaning function.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eWelding carried out with TIG method, method which does not require weld material, and therefore guarantees stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eFlanged supply connection and two system return connections for boiler differential temperature input and ensure minimum possible temperature in lowest point of the condensation curve and then take maximum advantage from the condensation process even in the presence of medium-high temperature returns.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eSmoke chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eHigh water content and low thermal load.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003ePre-mix, modulating, radiating burner, power modulation between minimum and maximum power depending on instantaneous heat load requirement; allows maximum acoustic comfort and low pollutant emissions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037800787,"sku":"HICIMONOLITEGT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIMONOLITEGT___L.jpg?v=1762863686"},{"product_id":"hicirexf","title":"ICI Caldaie Rex F","description":"\u003cp\u003eREX 7F-130F and REX 140F-350F steel boiler, cylindrical combustion chamber with reverse flame, completely closed round posterior side supported by a completely submerged nozzle. Connectible to pressure air jet burner for gas fuel operation. The boiler is designed to be used in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 °C). 3 stars classification according to 92\/42\/EEC directive in compliance with 192\/05 and 311\/06 Legislative Decree requirements.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoiler body built from high quality steel, made from front tube sheet turned towards the combustion chamber using RSB procedures and from convex rear plate (rather than a flat surface for a better resistance internal pressure), with laser cut holes.\u003c\/li\u003e\n\u003cli\u003eCylindrical revers flame combustion chamber, with the rear side completely sealed off by a convex bottom supported by a submerged nozzle; the flame presenting itself in the central part of the chamber, while hot gases return to the lower part of the partially submerged chamber. Hot gases will be conveyed through the tube bundle.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates - internally finned extruded aluminium (Fin-eR), pressure-fitted to the rear part of the boiler tubes smoke as to ensure full surface contact.\u003c\/li\u003e\n\u003cli\u003ePosterior fume box manufactured from thermal insulated steel sheets, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003cli\u003eBoiler casing equipped with system and working device connections, all manufactured with approved welding procedures and qualified personnel.\u003c\/li\u003e\n\u003cli\u003eHigh density, glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eSteel sheet, fibre-ceramic, thermal insulated, reversible rear door (only for models up to REX 180, last one being included), mounted on hinges, easily opened with equipped lever by drilled ferrules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037931859,"sku":"HICIREXF","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIREXF___L.jpg?v=1762863686"},{"product_id":"hicistelt","title":"ICI Caldaie Stelt","description":"\u003cp\u003eSTELT condensing boiler, made from AISI 316 Ti stainless steel with revers flame combustion chamber able to produce hot water at a maximum temperature of 100 °C. Connectible to air injected burners operating on gaseous fuels. According to 90\/36\/CEE (gas) directive, CE 311\/06 (efficiency) label, 89 \/366\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInclined boiler body for condensate drainage support\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber with reversed flame composed out of AISI\u003c\/li\u003e\n\u003cli\u003e316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/li\u003e\n\u003cli\u003eStainless steel fuel passage with special profiles, placed inside the combustion chamber in order to extend fume development and consequently increase heat exchange, or increase boiler efficiency (and obtain low NOx emissions in conjunction with Low NOx burners)\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eWelded using TIG, MIG and plasma procedures, methods that guarantee stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/li\u003e\n\u003cli\u003eFlanged delivery connection and two systems return connections for boiler differential input and ensure minimum possible temperature and take advantage of condensation benefits even in case of medium-high temperature returns.\u003c\/li\u003e\n\u003cli\u003eFlue gas chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/li\u003e\n\u003cli\u003eBurner mounting plate, for attaching pressure jet burners for gaseous fuels use.\u003c\/li\u003e\n\u003cli\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037997395,"sku":"HICISTELT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICISTELT___L.jpg?v=1762863687"},{"product_id":"hicisteltd","title":"ICI Caldaie Stelt Dual","description":"\u003cp\u003eAISI 316 Ti stainless steel, dual stacked boilers, reverse flame condensing. STELT DUAL Boiler is able to produce hot water with a maximum temperature of 100 °C. To be fitted with pressure jet burner for gas fuel operation In compliance with directives 90 \/396\/CEE (gas) - CE 311\/06 (efficiency) label, 89 \/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einclined boiler body for condensate drainage support\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber with reversed flame manufactured out of AISI 316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/li\u003e\n\u003cli\u003eStainless steel flue passage with special profiles, placed inside the combustion chamber in order to extend flue gas development and consequently increase heat exchange, or increase boiler efficiency (and obtain low NOx emissions in conjunction with Low NOx burners)\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eWelded using TIG, MIG and plasma procedures, methods that guarantee stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/li\u003e\n\u003cli\u003eFlanged delivery connection and two system return connections for boiler differential input and ensure minimum possible temperature in lowest point of the condensation curve and then take maximum advantage from the condensation process even in the presence of medium-high temperature returns.\u003c\/li\u003e\n\u003cli\u003eSmoke chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/li\u003e\n\u003cli\u003eBurner mounting plate, connectible to pressure jet burners with gaseous fuels use.\u003c\/li\u003e\n\u003cli\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed - front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351038062931,"sku":"HICISTELTD","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICISTELTD___L.jpg?v=1762863688"},{"product_id":"hicitnoxe","title":"ICI Caldaie Tnox.E Mthw (2500-6000)","description":"\u003cp\u003eTNOX.e (2500-6000)\u003cbr\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree pass, wet back boiler, suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems with duties ranging between 2500 and 6000 kW and temperatures higher than 100 °C. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIt also features heat exchange acceleration elements to ensure highest possible efficiency of its category. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eDesigned for 110°C maximum temperature (available for 10 bar designed pressure). \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003e-Horizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, endowed with special turbulence inductors designed and dimensioned in order to ensure stated efficiency achievement.\u003c\/li\u003e\n\u003cli\u003eSteel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control.\u003c\/li\u003e\n\u003cli\u003eInsulated steel sheet posterior smoke box equipped with an easily opened door\u003c\/li\u003e\n\u003cli\u003ecan be removed using equipped bolts using brass bolts in order to clean the smoke pipes; provided with cleaning door and chimney connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039340883,"sku":"HICITNOXe","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXE___L.jpg?v=1762863688"},{"product_id":"hicibxsteam","title":"ICI Caldaie Bx Steam","description":"\u003cp\u003eThe ICI Caldaie Model BX is a three pass reverse flame wet back boiler specifically designed for operation at 1 bar g. only. The steam dome on top of the shell increase the steam space volume as well as the distance between the evaporating surface and the steam outlet connection, resulting in high quality dry steam in spite of the low pressure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied fully packaged and ready for installation\u003c\/li\u003e\n\u003cli\u003eQuality dry steam owing to large steam space and steam drum\u003c\/li\u003e\n\u003cli\u003eFull stainless steel casing for food or sanitary applications\u003c\/li\u003e\n\u003cli\u003eStandby feed pump as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039373651,"sku":"HICIBXSTEAM","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIBXSTEAM___L.jpg?v=1762863689"},{"product_id":"hicicodex","title":"ICI Caldaie Codex","description":"\u003cp\u003eCODEX, three pass boilers, can be connected to pressure jet burners with gas fuel operation, able to produce hot water at a maximum temperature of 100 °C. In compliance with directives 90 \/396\/CEE (gas) - CE 311\/06 (efficiency) label, 89\/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSome of the product’s main features are related below:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrame composed out of steel vertical profile structure, complete with floor support.\u003c\/li\u003e\n\u003cli\u003ePanted boiler body characterized by a horizontal axis and gas ducts with a large cross-section parallel to the furnace and a different extension.\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber made of AISI 316 Ti (steel strongly bonded to rich chromium, nickel and titanium), welded with TIG method in order to withstand acid condensate attacks.\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eTwo system return connections:\u003c\/li\u003e\n\u003cli\u003eLow temperature (underfloor heating, radiators with large heat exchange surface, etc.\u003c\/li\u003e\n\u003cli\u003eMedium\/high temperature (water heater, towel rail radiator, common radiators)\u003c\/li\u003e\n\u003cli\u003eCondensate and gas collection box complete with chimney connection, made of AISI 316 Ti stainless steel.\u003c\/li\u003e\n\u003cli\u003eHigh water content and low thermal load.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039504723,"sku":"HICICODEX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICICODEX___L.jpg?v=1762863690"},{"product_id":"hicitnoxbt","title":"ICI Caldaie Tnox Bt Condensing","description":"\u003cp\u003e\u003cstrong\u003eTNOX BT COND\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSteel heat generator with 3 smoke ways, wetback, with integrated condensing unit serial connected to the generator, suitable for gaseous fuel pressurized combustion, intended for large heating systems with power ranging between 3500 and 7000 kW and operating temperatures between 40 and 100 °Designed for a security maximum temperature of 110°C. In compliance with EN303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003eHorizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts welded to tube plates, possibly fitted with helical turbulators, manufactured with a double tube and differentiated contact with non-condensing feature (minimum temperature return 35 °C) - condensing heat recovery unit to integrated in the rear part of the generator with thermal exchange sections consisting in AISI 316 Ti stainless steel plates, printed with patented shape, allowing the formation and drainage of condensate\u003c\/li\u003e\n\u003cli\u003eHydraulic manifold for series connection between condenser and generator, complete with expansion joint\u003c\/li\u003e\n\u003cli\u003eSingle steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control\u003c\/li\u003e\n\u003cli\u003ePosterior smoke chamber made from sheet AISI 316 Ti stainless steel, can be dismantled using the bolts; equipped with condensate drain coupling and exhaust connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, adequate thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test for each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039537491,"sku":"HICITNOXBT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXBT___L.jpg?v=1762863690"},{"product_id":"hicitnoxen","title":"ICI Caldaie Tnox En Mthw (7000-17000)","description":"\u003cp\u003e\u003cstrong\u003eTNOX EN (7000-17000)\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree pass, wetback, boiler suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems or with power ranging between 7000 and 17000 kW and work temperatures between 60 and 100 °C. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eDesigned for 110°C maximum temperature (available for 10 bar designed pressure). \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods - horizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, without helical turbulators - front smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and drilled plate for burner insertion\u003c\/li\u003e\n\u003cli\u003eRear smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content equipped with two flat separated doors, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eEquipped with accessories needed for automatic operation with mechanical and hydraulic assembly of all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039668563,"sku":"HICITNOXEN","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXEN___L.jpg?v=1762863691"},{"product_id":"hicitnoxeenc","title":"ICI Caldaie Tnox.E En Mthw (7000-17000)","description":"\u003cp\u003e\u003cstrong\u003eTNOX.e EN (7000-17000)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree pass, wetback, boiler suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems or with power ranging between 7000 and\u003c\/p\u003e\n\u003cp\u003e17000 kW and work temperatures between 60 and 100 °C. Designed for 110°C maximum temperature (available for 10 bar designed pressure). In compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003eHorizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, without helical turbulators\u003c\/li\u003e\n\u003cli\u003eFront smoke box made from steel sheet, thermally insulated with refractory materials with high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and drilled plate for burner insertion\u003c\/li\u003e\n\u003cli\u003erear smoke box made from steel sheet, thermally insulated with refractory materials\u003c\/li\u003e\n\u003cli\u003eWith a high aluminium content equipped with two flat separated doors, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351040553299,"sku":"HICITNOXeENC","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXEENC___L.jpg?v=1762863691"},{"product_id":"hiciwall","title":"ICI Caldaie Wall","description":"\u003cp\u003eWALL condensing boiler, with both European and Italian Patent designed by ICI Caldaie for high power in contained spaces. Particular boiler geometry together with large heat exchange surfaces allow considerable \u003cspan style=\"line-height: 1.4em;\"\u003efume temperature reduction resulting in 109% efficiency achievement (referring to PCI and Temp. Delivery\/Return 50\/30 °C). Latest concept burner, 20% to 100% Nominal Power pre-mix flame modulation. Reduced environmental impact achieved by under 10 ppm NOx emissions.\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge Combustion Chamber, passing flame with dry and low thermal load reversal chamber\u003c\/li\u003e\n\u003cli\u003eCrossed groove, W stainless steel, high concentration fume duct\u003c\/li\u003e\n\u003cli\u003eReverse double slope structure for condensate integral recovery, high and low temperature double return.\u003c\/li\u003e\n\u003cli\u003eParts in contact with combustion products - combustion chamber and gas plates - are entirely made out of AISI 316 Ti titanium stabilized stainless steel.\u003c\/li\u003e\n\u003cli\u003eCascade operation in advance setup with 125 kW and 150 kW modules having a maximum of 4 boilers, reaching a maximum power of 600 kW reached using condensing operation.\u003c\/li\u003e\n\u003cli\u003eModulating gas burners with total gas pre-mix, heat radiating cylindrical body, low NOx emission (below 10 ppm)\u003c\/li\u003e\n\u003cli\u003e20 to 100% maximum power adjustment.\u003c\/li\u003e\n\u003cli\u003e109% COP (coefficient of performance), 50\/30°C boiler water temperature\u003c\/li\u003e\n\u003cli\u003eEach module is equipped with a digital control panel for burner modulation management and climatic compensation for fluctuating temperature.\u003c\/li\u003e\n\u003cli\u003eAISI 316 L STAINLESS STEEL external casing, internally insulated with high density, thick mineral wool mattress.\u003c\/li\u003e\n\u003cli\u003eIPX4D protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351040651603,"sku":"HICIWALL","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIWALL___L.jpg?v=1762863692"},{"product_id":"hicievx","title":"ICI Caldaie Evx Indirect Steam Generator","description":"\u003cp\u003eICI\u003c\/p\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351041044819,"sku":"HICIEVX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIEVX___L.jpg?v=1762863695"},{"product_id":"hicigreenoxbt","title":"ICI Caldaie Greenox Bt Condensing","description":"\u003cp\u003eThe GREENO BT COND is a three pass wet back boiler with condenser manufactured with high quality steel to be fitted with burners with gaseous fuel operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon steel boiler body.\u003c\/li\u003e\n\u003cli\u003eLarge volume combustion chamber for single pass flame for low heat release, three pass, wet back horizontal combustion chamber and supported by a completely submerged nozzle.\u003c\/li\u003e\n\u003cli\u003eLaser cut tube plate holes.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates, fitted with special helical turbulators.\u003c\/li\u003e\n\u003cli\u003eThird smoke pass made possible by double layer, tube in tube differential contact, with anti-condensation feature.\u003c\/li\u003e\n\u003cli\u003eBAX condensing coil installed at the rear of the boiler, forming a single body consisting in: - AISI 316 Ti anti-acid stainless steel, consisting in Stainless steel Plates with a particular creased conformation in order to increase heat exchange surface area and facilitate condensate droplet formation, allowing proper drainage.\u003c\/li\u003e\n\u003cli\u003eCondensate collecting tray with inspection and cleaning door and lower part drainage.\u003c\/li\u003e\n\u003cli\u003eBoiler hydraulic connections\u003c\/li\u003e\n\u003cli\u003eBoiler casing with flow and return flanged connections, working device connections, inspection doors, all manufactured with approved welding procedures.\u003c\/li\u003e\n\u003cli\u003eEmbossed aluminium, round case cladding, high density glass wool, and thick mattress insulation.\u003c\/li\u003e\n\u003cli\u003eFlat front door with reversible opening, inner high-insulating ceramic casing, pivoting on hinges, easily opened by perforated rings equipped with levers as to guarantee a perfect combustion gas seal and easy service.\u003c\/li\u003e\n\u003cli\u003eFlat rear door, manufactured in high quality steel as to guarantee high heat resistance, constructed in one piece that can be easily opened and that allows gas duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351041241427,"sku":"HICIGREENOxBT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIGREENOXBT___L.jpg?v=1762863697"},{"product_id":"hdedietricheco340","title":"De Dietrich Eco C340\/640","description":"\u003cp\u003e\u003cstrong style=\"font-size: 12.8px;\"\u003eDe Dietrich ECO C340\/640\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDe Dietrich ECO C340\/C640 range of floor standing modulating condensing gas boiler. Fitted to operate on Natural Gas (20mbar) * Annual operating efficiency up to 100%. * Low NOX\u003cbr\u003e\u003cspan\u003eFloor-standing gas condensing boiler, single or double body\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eNew design of the heat exchanger to reach a \u003cstrong\u003eΔT \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eof 40°C for an optimization of the performance in DHW  mode\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"Default\"\u003e\u003cstrong\u003eModulation from 15% to 100%\u003c\/strong\u003e\u003cspan\u003e(20% to 100% for C340)\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli class=\"Default\"\u003eFitted to operate on natural gas only.\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eNew control panel \u003cstrong\u003eDiematic\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eEvolution \u003c\/strong\u003econnected and intuitive, for up to \u003cstrong\u003e8 boiler cascade\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e[No more specific panel for the slave boilers, only Diematic Evolution]\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eSame connections and size as previous versions for a \u003cstrong\u003eperfect backwards compatibility\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eGas supply pressure: 20 mbar or 300 mbar with pressure regulator (optional)\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eCan work with \u003cstrong\u003ehydrogen \u003c\/strong\u003emix at a rate of 20%\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eLow noise level and electricity consumption thanks to the modulating fan\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eExchanger in cast aluminium\/silicium components with self-cleaning properties and with inspection trap\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eMonobloc boiler, \u003cstrong\u003efactory mounted control panel \u003c\/strong\u003efor time saving on installation\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eEasy implementation thanks to a \u003cstrong\u003ecompact design with only 72 cm width \u003c\/strong\u003e(goes through a standard door) and \u003cstrong\u003ewheels \u003c\/strong\u003eeasy to position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"Default\"\u003e\u003cstrong\u003eNew hydraulic accessories \u003c\/strong\u003efor easy and clean installation\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli class=\"Default\"\u003eThe basic supply also includes the \u003cstrong\u003eflue sensor and the cleaning knife\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eElectronic ignition\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eIonisation sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"Default\"\u003e\u003cstrong\u003eA boiler that can be integrated in smart boiler room concepts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli class=\"Default\"\u003eA delta T of 40°C allows to \u003cstrong\u003esave 5% efficiency \u003c\/strong\u003ecompared to a delta T of 20°C\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eIt also allows to \u003cstrong\u003edivide by 2 the flow \u003c\/strong\u003eand thus to reduce the diameter of the pipes\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eThanks to this new delta T, you can reduce in the same time the pipes diameters, the dimension of the pumps, etc, on the heating part, but also \u003cstrong\u003eimprove the efficiency \u003c\/strong\u003eof the domestic hot water production\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"Default\"\u003e\u003cstrong\u003eDIEMATIC Evolution \u003c\/strong\u003e\u003cspan\u003econtrol :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eHigh resolution \u003cstrong\u003efull colour graphic display\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMenu in \u003cstrong\u003eclear text\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy and \u003cstrong\u003eintuitive navigation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePossibility, from factory, to control \u003cstrong\u003e2 direct or mixed circuits \u003c\/strong\u003e(+1 in option) and 1 DHW circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade control \u003c\/strong\u003eup to 8x C 340 or 4x C 640\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":52351043076435,"sku":"HDEDIETRICHECO340","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HDEDIETRICHECO340___L.jpg?v=1762863700"},{"product_id":"hdedietrichamc456590115","title":"De Dietrich Evodens Amc Commercial","description":"\u003cp\u003eDe Dietrich \u003cspan\u003eAMC 35\/\u003c\/span\u003e45\/65\/90\/115\/160 range of wall-hung commercial condensing boilers, equipped to operate on natural gases and can be converted to propane. With minimum floor space for maximum output, the Innovens Pro \u003cspan\u003eAMC\u003c\/span\u003e is a high-technology wall-hung gas condensing boiler that offers a boiler output range of 7.0 kW to 161.5kW, optimised for energy savings and ecology. A system that is complete, flexible and intelligent, the Innovens Pro MCA can be customised to provide domestic hot water output at high levels of comfort, or installed within a complete hydraulic cascade system to connect 2-10 boilers to offer an output of over 1,292kW.\u003c\/p\u003e\n\u003cp\u003eBoiler Range:\u003cbr\u003eAMC 35: System boiler 7.0 to 35.9 kW\u003cbr\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC 45: boiler from   8.9 to 43 kW\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e 65: boiler from 13.3 to 65 kW\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e 90: boiler from 15.8 to 89.5 kW\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e 115: boiler from 18.4 to 114 kW\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e 160: boiler from 34.6 to 161.5 kW\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEvodens PRO \u003c\/strong\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eAMC 45, AMC 65, AMC 90, AMC 115 \u003c\/span\u003e\u003cstrong style=\"font-size: 12.8px;\"\u003efrom 9.1 to 109.7 kW\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall-hung gas condensing boiler:\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eEquipped to operate on natural gases and can be converted to propane\u003c\/li\u003e\n\u003cli\u003eGas supply pressure: 20 mbar\u003c\/li\u003e\n\u003cli\u003eForced flue or chimney connection\u003c\/li\u003e\n\u003cli\u003eAnnual operating efficiency up to 110%\u003c\/li\u003e\n\u003cli\u003eLow pollutant emissions: NOx \u0026lt; 37 mg\/kWh for AMC 45, 32 mg\/kWh for AMC 65, 45 mg\/kWh for AMC 90 \u003cspan style=\"font-size: 12.8px;\"\u003eand 46 mg\/kWh for AMC 115\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMonoblock heating body in aluminium\/silicium\u003c\/li\u003e\n\u003cli\u003eGas premix burner in stainless steel with a surface in woven metallic fibres, modulating from 18 to 100% \u003cspan style=\"font-size: 12.8px;\"\u003eof output\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFan with air intake silencer\u003c\/li\u003e\n\u003cli\u003eDelivered with integrated automatic air vent, runoff siphon\u003c\/li\u003e\n\u003cli\u003eChoice of one of the following two control panels: DIEMATIC Evolution or iniControl 2\u003c\/li\u003e\n\u003cli\u003ePackaging: 2 packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCASCADE KIT:\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eAMC 45 to 115 cascade systems are available in 3 versions:\u003c\/li\u003e\n\u003cli\u003eLW: for wall-hung alignment of the boilers\u003c\/li\u003e\n\u003cli\u003eLV: for floor-standing alignment of the boilers\u003c\/li\u003e\n\u003cli\u003eRG: for back to back assembly of the boilers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCascade systems include:\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003ethe decoupling cylinder\u003c\/li\u003e\n\u003cli\u003ethe boiler connection collector including the heating flow and return connection pipes 65 mm, the gas connection pipes  65 mm and the flanges the primary injection pumps\u003c\/li\u003e\n\u003cli\u003ethe boiler connection kits including the outlet valve, the multi-function return valve (with filling and draining valve, gate valve, non-return valve, \u003cspan style=\"font-size: 12.8px;\"\u003esafety valve and connection for the expansion vessel), and the gas valve\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ethe wall assembly rail for LW versions or, for LV and RG versions, the corner support structures with the \u003cspan style=\"font-size: 12.8px;\"\u003eboiler assembly frame\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ethe outlet sensor + sensor tube and the inter-boiler BUS connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOPTIONS:\u003cbr\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eInsulation Kits \u003cbr\u003eC\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eonnecting flanges.\u003c\/span\u003e\u003c\/p\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":52351043141971,"sku":"HDEDIETRICHAMC456590115","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HDEDIETRICHAMC456590115___L.jpg?v=1762863701"},{"product_id":"hhdedietrichmcapro160","title":"De Dietrich Mca160","description":"\u003cp\u003e\u003cstrong\u003eDe Dietrich Innovens MCA Pro\u003c\/strong\u003e \u003cstrong\u003e160\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MCA Pro 160 is one of the most advanced wall-hung boilers on the market. It can work as an extension of the Innovens MCA Pro range giving you the ability to mix and match cascades. This enables you to achieve the closest possible match to your required load.\u003cbr\u003eWith plant room space at a premium, the ability to move large outputs away from the floor and onto the wall makes the overall design process easier.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eClass-leading power output to physical size ratio.\u003c\/li\u003e\n\u003cli\u003eAll new cast aluminium heat exchanger for improved performance and efficiency.\u003c\/li\u003e\n\u003cli\u003eNext new human machine interface gives the customer great flexibility in terms of external management.\u003c\/li\u003e\n\u003cli\u003eSuitable for use on sealed systems and open-vented installations.\u003c\/li\u003e\n\u003cli\u003eIdeal for use in both new and retrofit installations\u003c\/li\u003e\n\u003cli\u003eSingle boiler out-put 34.6 to 161.5 kW\u003c\/li\u003e\n\u003cli\u003eCascade output up to 1292 kW\u003c\/li\u003e\n\u003cli\u003eMaximum gross efficiency up to 99% GCV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AND BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eBuilt on the De Dietrich Innovens MCA platform\u003c\/li\u003e\n\u003cli\u003eTried and tested technology\u003c\/li\u003e\n\u003cli\u003eClass-leading output to physical size ratio\u003c\/li\u003e\n\u003cli\u003ePlant room space reduction and access through doors and lifts easier\u003c\/li\u003e\n\u003cli\u003eCascade up to eight boilers in-line or back-to-back\u003c\/li\u003e\n\u003cli\u003eTime-saving installation with on-site assembly\u003c\/li\u003e\n\u003cli\u003eMixed cascade (with De Dietrich Innovens MCA) available\u003c\/li\u003e\n\u003cli\u003eExact matching of heat output requirements\u003c\/li\u003e\n\u003cli\u003eControl supplied as standard with all functions as the De Dietrich Innovens MCA\u003c\/li\u003e\n\u003cli\u003eTime and temperatures can be set and controlled by the end user\u003c\/li\u003e\n\u003cli\u003eIn-built 0-10V and free volt contacts\u003c\/li\u003e\n\u003cli\u003eCan connect to any BMS without additional parts needed\u003c\/li\u003e\n\u003cli\u003eCleanable heat exchanger as with all De Dietrich Innovens MCA models\u003c\/li\u003e\n\u003cli\u003eDry side can be examined and descaled. Cleaning tool and gaskets supplied\u003c\/li\u003e\n\u003cli\u003eClick and Go condensate drain underneath (not inside)\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003cli\u003eMultiple flueing capabilities\u003c\/li\u003e\n\u003cli\u003eFlexible installation in new and existing buildings\u003c\/li\u003e\n\u003cli\u003eLow NOx to ErP Ecodesign (iii) 2018 and EN15502 Pt1 2015 Class VI\u003c\/li\u003e\n\u003cli\u003eFuture-proof for emissions regulation\u003c\/li\u003e\n\u003cli\u003eIn-built non-return valve between valve and burner\u003c\/li\u003e\n\u003cli\u003eStops spill back between cascaded units and allows some pressurisation of flue\u003c\/li\u003e\n\u003cli\u003eInternal light\u003c\/li\u003e\n\u003cli\u003eAids servicing in plant rooms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":52351043404115,"sku":"HHDEDIETRICHMCAPRO160","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHDEDIETRICHMCAPRO160___L.jpg?v=1762863703"},{"product_id":"hicirex","title":"ICI Caldaie Rex","description":"\u003cp\u003eREX 7-130 and REX 140-350 steel boiler, cylindrical combustion chamber with reverse flame, completely closed round posterior side supported by a completely submerged nozzle. Connectible\u003cspan style=\"line-height: 1.4em;\"\u003e to pressure air jet burner for gas or liquid fuel operation. Used\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoiler body built from high quality steel, made from front tube sheet turned towards the combustion chamber using RSB procedures and from convex rear plate (rather than a flat surface for a better resistance internal pressure), with laser cut holes.\u003c\/li\u003e\n\u003cli\u003eCylindrical revers flame combustion chamber, with the rear side completely sealed off by a convex bottom supported by a submerged nozzle; the flame presenting itself in the central part of the chamber, while hot gases return to the lower part of the partially submerged chamber. Hot gases will be conveyed through the tube bundle.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates, fitted with special helical turbulators.\u003c\/li\u003e\n\u003cli\u003ePosterior fume box manufactured from thermal insulated steel sheets, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003cli\u003eBoiler casing equipped with system and working device connections, all manufactured with approved welding procedures and qualified personnel.\u003c\/li\u003e\n\u003cli\u003eHigh density, glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eREX 140-350 round, embossed, aluminium casing.\u003c\/li\u003e\n\u003cli\u003eSteel sheet, fibre-ceramic, thermal insulated, reversible rear door (only for models up to REX 180, last one being included), mounted on hinges, easily opened with equipped lever by drilled ferrules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52356763091283,"sku":"HICIREX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIREX___L.jpg?v=1762940835"},{"product_id":"hparts","title":"ICI Caldaie Spare Parts","description":"\u003cp\u003e\u003cstrong\u003eSpare Parts Depot:\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn addition to a full range of spares and accessories for lines for which Hevac is the exclusive distributor, the division also carries an extensive portfolio of accessories and first line replacement parts for many of the gas and oil boilers and burners currently supplied in the Irish Market.\u003cspan class=\"apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eOver time, components wear or fail and need to be replaced. Hevac Parts Depot maintains an extensive inventory of spare parts for many manufactures of oil and gas burners, both old and new, to keep your equipment on-line and running at peak performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe have maintained an extensive library of exploded drawings and parts list for many heating appliances and we will see that you get the correct parts quickly. Our spare parts sales team are available to assist you with detailed exploded drawing to assist in sourcing your requirements and will endeavour to source parts currently not stocked on our shelves.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"apple-converted-space\"\u003ePlease contact our parts division who \u003c\/span\u003ewould be delighted to assist you with selecting the correct part for your needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eAlternatively download our parts books below:\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52356763124051,"sku":"HPARTS","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HPARTS___L.jpg?v=1762940837"},{"product_id":"hiciasgxen","title":"ICI Caldaie Asgxen","description":"\u003cp\u003e\u003cstrong\u003eASGX EN (3000-17000)\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree smoke ways, wetback, automatic smoke ducts heat generator, suitable for liquid or gaseous fuel pressurized combustion, intended for heating or technological systems or with power ranging between 3000 and 17000 kW and temperatures higher than 100 °C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with methods approved and labelled CE in accordance with the PED 97\/23\/EC directive\u003c\/li\u003e\n\u003cli\u003eHorizontal combustion chamber with single pass flame, with corrugated section\u003c\/li\u003e\n\u003cli\u003eWetback combustion produce reversal chamber, supported and connected to a socket of 500 mm diameter with manhole function\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes into which tubes are expanded and welded. The tube\u003c\/li\u003e\n\u003cli\u003eplates are completely dished after heating and butt welded thus avoiding t-butt welds\u003c\/li\u003e\n\u003cli\u003eThe shell with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with manhole and hand holes, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, without Turbulators\u003c\/li\u003e\n\u003cli\u003eSingle front opening door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control.\u003c\/li\u003e\n\u003cli\u003eInsulated steel sheet posterior smoke box equipped with an easily opened door can\u003c\/li\u003e\n\u003cli\u003ebe removed using equipped bolts using brass bolts in order to clean the smoke pipes; provided with cleaning door and chimney connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test for each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284615507,"sku":"HICIASGXEN","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIASGXEN___L.jpg?v=1763204046"},{"product_id":"hiciasx","title":"ICI Caldaie Asx","description":"\u003cp\u003eASX hot water generator is MonoBloc with automatic operation, complete with all accessories needed for rapid commissioning. Manufactured with quality steel according to regulations in force and is welded with automatic submerged arc methods\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with methods approved and labelled CE in accordance with the PED 97\/23\/EC directive\u003c\/li\u003e\n\u003cli\u003eHorizontal wetback combustion chamber with reverse flame, supported and guided\u003c\/li\u003e\n\u003cli\u003eby a perforated stub to ensure full wet back design; has a curved surface beginning with ASX 2000 models\u003c\/li\u003e\n\u003cli\u003eFlat tube plates with plasma drilled holes; front plate bent towards the combustion chamber, with head to head welding rather than angle throughout an angle, for models beginning with ASX 2000\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with superior, inferior head hatch, lifting eye bolt.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, equipped with helical turbulators\u003c\/li\u003e\n\u003cli\u003eSingle steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control\u003c\/li\u003e\n\u003cli\u003eSteel sheet posterior smoke box can be removed using equipped bolts in order to clean the smoke pipes; provided with cleaning door and chimney connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, adequate thickness thermal insulation, with embossed aluminium protective sheet mounted on a rectangular frame\u003c\/li\u003e\n\u003cli\u003eSupplied accessories needed for automatic operation with mechanical and hydraulic assembly for all equipment and certifications, also in compliance with the PED 97 \/23\/EC Directive\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284648275,"sku":"HICIASX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIASX___L.jpg?v=1763204047"},{"product_id":"hicibax","title":"ICI Caldaie Bax Condensing Heat Recovery","description":"\u003cp\u003eICI Caldaie BAX unit is a condensing heat recovery unit built from AISI 316 Ti stainless steel. The BAX unit must be located after the boiler flue gas exit output, exclusive for natural gas or LPG fired boiler\/burners. When the flue gas passes through the recovery unit, their temperature drops remarkably and if the system return temperature is below 57°C, condenses the water contained vapour by exploiting the latent heat of condensation.\u003c\/p\u003e\n\u003cp\u003eThe recovery unit must be hydraulically connected in series to matching boiler; the increase in water temperature is only by few Celsius degrees and the check of work minimum temperature permitted by the boiler is mandatory.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eThe boiler shell with system boiler flow and return connections, with external mineral wool insulation and embossed aluminium cladding.\u003c\/li\u003e\n\u003cli\u003eAISI 316 Ti stainless steel front and back smoke complete with flue gas and condensate drain connections\u003c\/li\u003e\n\u003cli\u003eHeight adjustable support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284681043,"sku":"HICIBAX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIBAX___L.jpg?v=1763204047"},{"product_id":"hiciblunox","title":"ICI Caldaie Blunox.E","description":"\u003cp\u003eThe ICI Caldaie BLUENO three pass reverse flame wet back boiler was developed to incorporate the latest technology to ensure an environmentally friendly performance. The reverse flame boiler incorporates a stainless steel inner sleeve (INOX AISI 310S) which creates partial flue gas re-circulation, resulting in low emissions and high efficiency rated a 3star according to the 92\/42\/CEE.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow NOx, low CO emissions\u003c\/li\u003e\n\u003cli\u003eFlanged front plate without T-butt weld to the furnace\u003c\/li\u003e\n\u003cli\u003eDished furnace back\u003c\/li\u003e\n\u003cli\u003eHigh water volume\u003c\/li\u003e\n\u003cli\u003eAnti-scale and anti-condensate design\u003c\/li\u003e\n\u003cli\u003eCasing made of easy to mount painted steel panels, inclusive of front and rear panels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284713811,"sku":"HICIBLUNOx","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIBLUNOX___L.jpg?v=1763204048"},{"product_id":"hiciflash","title":"ICI Caldaie Flash","description":"\u003cp\u003eFLASH is an instantaneous steam generator. Its features make the FLASH generator an ideal steam producer for laundries and ironing machines, able to meet dry steam small and medium requests, preventing thermal plant overloads.\u003c\/p\u003e\n\u003cp\u003eThe generator is ready for a quick and easy installation, it only needs are a connections to a power, hydraulic, steam lines and drain connection. Electrical connections are made according to the safety norms, and converge to a single centralized panel. The generator is provided with a level control, automatic water feed. Simple and \u003cspan style=\"line-height: 1.4em;\"\u003eeffective utilization, thanks to the front control panel. Electric and automatic steam generator, with variable power from 7 to 24 KW. The generator can be fed directly from the mains or from a special stainless steel reservoir.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe electric automatic steam generator is particularly suitable for polished surface ironing press operations (indicated for cotton material ironing) or equipped with a steam gun, and indicated for fur tapering and ironing. Available with a single group of resistors (three elements) or with two groups of independent resistors \u003cspan style=\"line-height: 1.4em;\"\u003e(six elements). The boiler body is built according to PED rules in force, and equipped with INAIL safety devices.\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard equipment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel indicator\u003c\/li\u003e\n\u003cli\u003eSteam stop valve for flow start\u003c\/li\u003e\n\u003cli\u003eSafety valve\u003c\/li\u003e\n\u003cli\u003eManometer\u003c\/li\u003e\n\u003cli\u003ePressure gauges\u003c\/li\u003e\n\u003cli\u003eAutomatic level regulator\u003c\/li\u003e\n\u003cli\u003eFeed water pump\u003c\/li\u003e\n\u003cli\u003eNon return valve\u003c\/li\u003e\n\u003cli\u003eDrain valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional accessories:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCondensate recovery stainless steel tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial versions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower delivery without neutral phase\u003c\/li\u003e\n\u003cli\u003eNominal pressure 7 bar\u003c\/li\u003e\n\u003cli\u003eStainless steel AISI 304 version\u003c\/li\u003e\n\u003cli\u003eStainless steel AISI 304 water contact components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284779347,"sku":"HICIFLASH","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIFLASH___L.jpg?v=1763204049"},{"product_id":"hicifxfxdual","title":"ICI Caldaie Fx\/Fx Dual","description":"\u003cp\u003eFX is an fully automatic, high efficiency, instantaneous steam boiler with smoke \u003cspan style=\"line-height: 1.4em;\"\u003etubes and flame reversal,. Low water content and reduced dimensions are the prerogatives \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003ethat make the FX generator the most indicated steam producer for all \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003esmall and medium installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eSingle (FX) or modular operation boilers with two stacked boilers (FX DUAL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body\u003c\/li\u003e\n\u003cli\u003eWelded and tested with methods approved and labelled CE in accordance with \u003cspan style=\"line-height: 1.4em;\"\u003ethe PED 97 \/23\/EC directive\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHorizontal wetback combustion chamber with flame reversal, supported and \u003cspan style=\"line-height: 1.4em;\"\u003eguided by a perforated stub to ensure its effective wetting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlat tube plates with plasma cut holes\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment \u003cspan style=\"line-height: 1.4em;\"\u003eoperation; equipped with lower inspection coupling\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, equipped with helical t\u003cspan style=\"line-height: 1.4em;\"\u003eurbolators\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSingle steel sheet front door, thermally insulated by ceramic fiber, mounted on \u003cspan style=\"line-height: 1.4em;\"\u003eadjustable hinges, easily opened by hand wheel. Without the need to remove \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003ethe burner; equipped with light indicator for combustion control\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSteel sheet rear smoke box can be removed using equipped bolts in order to \u003cspan style=\"line-height: 1.4em;\"\u003eclean the smoke tubes; provided with cleaning door and chimney connection\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact dimension support (800 mm width) built in carbon steel plate adapted \u003cspan style=\"line-height: 1.4em;\"\u003eto equipment lift and handling by fork lift.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh density mineral wool mattress thermal insulation of adequate thickness;\u003c\/li\u003e\n\u003cli\u003eIntegral coating with stainless steel panels mounted on rectangular frame\u003c\/li\u003e\n\u003cli\u003eSuitability for liquid or gaseous fuels, for a steam production from 50 to 300 kg\/h\u003c\/li\u003e\n\u003cli\u003eSupplied accessories needed for automatic operation with mechanical and hydraulic \u003cspan style=\"line-height: 1.4em;\"\u003eassembly for all equipment and certifications, also in compliance with the\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePED 97 \/23\/EC Directive\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone \u003cspan style=\"line-height: 1.4em;\"\u003einsulated wires inserted in PVC protective sheaths all subjected to final functionality \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003etest\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284877651,"sku":"HICIFXFXDUAL","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIFXFXDUAL___L.jpg?v=1763204050"},{"product_id":"hicigx","title":"ICI Caldaie Gx","description":"\u003cp\u003eThe GX steam generator with three smoke ways is a MonoBloc unit with excellent performance and with original technical solutions, designed and constructed to give maximum guarantee of reliability, durability, and management. The generator is horizontal, 3 smoke ways, passing flame, wetback semi-stationary type.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e-P265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with methods approved and labelled CE in accordance with the PED 97\/23\/EC directive\u003c\/li\u003e\n\u003cli\u003eHorizontal combustion chamber with single pass flame, with corrugated section for models beginning with GX2500 - wetback combustion produce reversal chamber, supported and connected to a socket of 500 mm diameter with manhole function\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes into which tubes are expanded and welded. The tube plates are completely dished after heating and butt welded thus avoiding t-butt welds\u003c\/li\u003e\n\u003cli\u003eThe shell with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with manhole and hand holes, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, without turbulators\u003c\/li\u003e\n\u003cli\u003eFront smoke box made from steel sheet, thermally insulated with refractory materials with high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone to suit burner\u003c\/li\u003e\n\u003cli\u003eRear smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content equipped with two flat separated doors, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above\u003c\/li\u003e\n\u003cli\u003ethe boiler - high density, mineral wool mattress, adequate thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eSuitability for liquid or gaseous fuels, for a steam production from 1700 to 20000 kg\/h\u003c\/li\u003e\n\u003cli\u003eSupplied accessories needed for automatic operation with mechanical and hydraulic assembly for all equipment and certifications, also in compliance with the PED 97 \/23\/EC Directive\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284910419,"sku":"HICIGX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIGX___L.jpg?v=1763204050"},{"product_id":"hicigxc","title":"ICI Caldaie Gxc","description":"\u003cp\u003eThe GXC generator is an innovative generator which combines steam production by combustion to hot fumes heat recovery, fumes arising from external sources; the latter free source is configured as the priority, while the combustion can simply serve as a backup or to provide the remaining power if recovery fumes are not sufficient to cover system steam demand.\u003c\/p\u003e\n\u003cp\u003eFrom a single compact design generator are thus combined two operating principles:\u003cspan style=\"line-height: 1.4em;\"\u003e- \u003cbr\u003e1. Combustion operation, three smoke ways, passing flame and wetback.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e2. Recovery operation, with direct completely separate and independent smoke passing, but immersed in the same boiler water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with methods approved and labelled CE in accordance with the PED 97 \/23\/EC directive\u003c\/li\u003e\n\u003cli\u003eHorizontal, passing flame combustion chamber, with possible curved hot manufactured section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion produce reversion chamber, sported and connected to a socket of 500 mm diameter with manhole function\u003c\/li\u003e\n\u003cli\u003eTube plates with holes drilled by the drill machine and then re bored out by smoke\u003c\/li\u003e\n\u003cli\u003epipe welding; all of the plates are completely reshaped using heat, with head to head\u003c\/li\u003e\n\u003cli\u003ewelds rather than angle welds, on all models\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with superior, inferior head hatch, lifting eye bolt.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, eventually equipped\u003c\/li\u003e\n\u003cli\u003ewith turbulators\u003c\/li\u003e\n\u003cli\u003eFront smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and a perforated plate for burner inclusion\u003c\/li\u003e\n\u003cli\u003eRear smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content equipped with two flat separated doors and rotating on a double-jointed hinges, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eFront manifold for hot fumes inlet integrated into the front fumes chamber, made\u003c\/li\u003e\n\u003cli\u003efrom steel sheets thermally insulated with high aluminium content refractory materials, equipped with two distinct flat doors, lined in ceramic fibre rotating on a double-jointed hinges complete with connection flanges for fumes duct with a top entrance.\u003c\/li\u003e\n\u003cli\u003eRear manifold for cold fumes outlet integrated into the posterior fumes chamber, made from steel sheets thermally insulated with high aluminium content refractory materials, equipped with two distinct flat doors, lined in ceramic fibre rotating on a double-jointed hinges complete with connection flanges for fumes duct with a top entrance or for economizer connection.\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, adequate thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eSupplied accessories needed for automatic operation with mechanical and hydraulic assembly for all equipment and certifications, also in compliance with the PED 97 \/23\/EC Directive\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284943187,"sku":"HICIGXC","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIGXC___L.jpg?v=1763204051"},{"product_id":"hicimonolitejb","title":"ICI Caldaie Monolite Jb","description":"\u003cp\u003eThe Monolite JB AISI 316 Ti stainless steel, passing flame combustion chamber, vertical heat exchanger, condensation MONOLITE JB Boiler is able to produce hot water with a maximum temperature of 100 °C. Connectible to pressure air jet burner for gas fuel operation In compliance with directives 90 \/396\/CEE (gas) - CE 311\/06 (efficiency) label, 89 \/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eFrame manufactured out of steel vertical profile structure, complete with floor support.\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber manufactured out of AISI 316 Ti stainless steel, MIG pulse welded, able to withstand acid condensate attack.\u003c\/li\u003e\n\u003cli\u003eAISI 316 Ti anti-acid stainless steel, vertical heat exchange surfaces, TIG welded, grafted perpendicularly to the combustion chamber, consisting of stainless steel plates printed with special conformity specifications in order to increase heat exchange surface, and facilitate condensate droplet formation, allowing adequate drainage. Heat exchange surface vertical arrangement also facilitates condensate drainage, ensuring an effective plate self-cleaning function.\u003c\/li\u003e\n\u003cli\u003eWelding carried out with TIG method, method which does not require weld material, and therefore guarantees stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/li\u003e\n\u003cli\u003eFlanged supply connection and two system return connections for boiler differential temperature input and ensure minimum possible temperature in lowest point of the condensation curve and then take maximum advantage from the condensation process even in the presence of medium-high temperature returns.\u003c\/li\u003e\n\u003cli\u003eSmoke chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/li\u003e\n\u003cli\u003eHigh water content and low thermal load.\u003c\/li\u003e\n\u003cli\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed\u003c\/li\u003e\n\u003cli\u003eFront door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387284975955,"sku":"HICIMONOLITEJB","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIMONOLITEJB___L.jpg?v=1763204052"},{"product_id":"hiciopx","title":"ICI Caldaie Opx Thermal Oil Generator","description":"\u003cp\u003eThe OPX thermal oil generator has 3 pass configurations with single pass combustion chamber and flue gas outlet in the rear. Is designed for low thermal loads and high oil speeds in order to eliminate any risk of cracking, namely the process of oil thermal decomposition when the oil is subjected to overheating.\u003c\/p\u003e\n\u003cp\u003eIn addition, the very low thermal capacity, due to reduced use of refractory cements, involves a high degree of reliability against the risk of overheating even in cases of oil circulation arrest.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThermal oil heat generator, horizontal axis coil spirally wound\u003c\/li\u003e\n\u003cli\u003eFe 35 UNI 663\/68 carbon steel, MANNESMANN quality S. S. tube coils built curved with multiple tangent spirals, various combustion gas revolutions being separated.\u003c\/li\u003e\n\u003cli\u003eCarbon steel boiler support able to ensure whole group support; a service platform is provided laterally along with the diathermic fluid circulation group\u003c\/li\u003e\n\u003cli\u003eBolted front door, easily opened for inspection and cleaning, equipped with cone burner and combustion control light.\u003c\/li\u003e\n\u003cli\u003eExternal high density, mineral wool thermal insulation, with aluminium finish sheet mounted on a rectangular frame\u003c\/li\u003e\n\u003cli\u003eFumes connection to flange exhaust, housed in the upper fumes chamber, bolted to the boiler and easily removable for cleaning operations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285008723,"sku":"HICIOPX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIOPX___L.jpg?v=1763204053"},{"product_id":"hiciopxrec","title":"ICI Caldaie Opx Rec Thermal Oil Generator","description":"\u003cp\u003eThe OPX REC thermal oil generator has 3 smoke ways, passing flame combustion chamber conveyed into a heat recovery unit. Is designed for low thermal loads and high oil speeds in order to eliminate any risk of cracking, namely the process of oil thermal decomposition when the oil is subjected to overheating.\u003cbr\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn addition, the very low thermal capacity, due to reduced use of refractory cements, involves a high degree of reliability against the risk of overheating even in cases of oil circulation arrest.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiathermic fluid heat generator, horizontal axis coil, spiral warped\u003c\/li\u003e\n\u003cli\u003eFe 35 UNI 663\/68 carbon steel, MANNESMANN quality S. S. tube coils built curved with multiple tangent spirals, various combustion gas revolutions being separated.\u003c\/li\u003e\n\u003cli\u003eCarbon steel boiler support able to ensure whole group support; a service platform is provided laterally along with the diathermic fluid circulation group\u003c\/li\u003e\n\u003cli\u003eBolted front door, easily opened for inspection and cleaning, equipped with cone burner and combustion control light.\u003c\/li\u003e\n\u003cli\u003eExternal high density, mineral wool thermal insulation, with aluminium finish sheet mounted on a rectangular frame\u003c\/li\u003e\n\u003cli\u003eFumes connection to flange exhaust, housed in the upper fumes chamber, bolted to the boiler and easily removable for cleaning operations.\u003c\/li\u003e\n\u003cli\u003eCombustion air preheater installed in the rear part of the generator so as to form a single unit consists of:\u003c\/li\u003e\n\u003cli\u003eAISI 304 stainless steel tube bundle with vertical tubes and expanded tube plates\u003c\/li\u003e\n\u003cli\u003eHot fumes collecting chamber and outlet fitting for cold smoke\u003c\/li\u003e\n\u003cli\u003eFume collection hood with two cleaning and inspection doors and a wide rear opening for the preheater\u003c\/li\u003e\n\u003cli\u003eCold air intake fitting with flow that surrounds the tube bundle and crosses it in counter current\u003c\/li\u003e\n\u003cli\u003eHot air conduction duct incorporated into generator structure in order to bring air in front of the combustion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285369171,"sku":"HICIOPXREC","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIOPXREC___L.jpg?v=1763204054"},{"product_id":"hicisixen","title":"ICI Caldaie Sixen Steam","description":"\u003cp\u003eSIXEN smoke tubes steam generator is packaged for automatic operation complete with all accessories needed for rapid commissioning. Is built with tested quality steel according to regulations in force and is welded with automatic submerged arc methods.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with methods approved and labelled CE in accordance with the PED 97 \/23\/EC directive horizontal wetback combustion chamber with flame reversal chamber, supported and guided by a perforated stub to ensure its full wet back; has a corrugated surface up to SIXEN 5000 models.\u003c\/li\u003e\n\u003cli\u003eFlat tube plates with plasma drilled holes; front plate flanged towards the combustion chamber, with head to head welding rather than angle throughout an angle, for models beginning with SIXEN 4000\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with superior, inferior head hatch, lifting eye bolt.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, equipped with helical turbulators single steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control\u003c\/li\u003e\n\u003cli\u003eSteel sheet rear smoke box can be removed using equipped bolts in order to clean the smoke tubes; provided with cleaning door and chimney connection support built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, adequate thickness thermal insulation, with corrugated stainless steel protective sheet mounted on a rectangular frame\u003c\/li\u003e\n\u003cli\u003eInspection openings side containing a flanged hand hole (no. 2 inspections beginning with SIXEN 2500 model)\u003c\/li\u003e\n\u003cli\u003eSuitability for liquid or gaseous fuels, for a steam production from 3500 to 5000 kg\/h\u003c\/li\u003e\n\u003cli\u003eSupplied accessories needed for automatic operation with mechanical and hydraulic assembly for all equipment and certifications, also in compliance with the PED 97 \/23\/ EC Directive\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single Boiler House control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285434707,"sku":"HICISIXEN","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICISIXEN___L.jpg?v=1763204055"},{"product_id":"hicitnox","title":"ICI Caldaie Tnox Mthw (2500-6000)","description":"\u003cp\u003e\u003cstrong\u003eTNOX (2500-6000)\u003cbr\u003e\u003c\/strong\u003eThree pass, wet back boiler, suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems with duties ranging between 2500 and 6000 kW and temperatures higher than 100 °C. Designed for 110°C maximum temperature (available for 10 bar design pressure). In compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive. \u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003eHorizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet.\u003c\/li\u003e\n\u003cli\u003eSteel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control.\u003c\/li\u003e\n\u003cli\u003eInsulated steel sheet posterior smoke box equipped with an easily opened door can be removed using equipped bolts using brass bolts in order to clean the smoke tubes; provided with cleaning door and chimney connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test for each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285500243,"sku":"HICITNOX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOX___L.jpg?v=1763204055"},{"product_id":"hicitnx","title":"ICI Caldaie Tnx Hot Mtwh (3000-7000)","description":"\u003cp\u003eICI\u003c\/p\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285565779,"sku":"HICITNX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNX___L.jpg?v=1763204056"},{"product_id":"hicitnxen","title":"ICI Caldaie Tnx En Hot Mtwh (8000-20000)","description":"\u003cp\u003e\u003cstrong\u003eTNX EN (8000-20000)\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree pass, wetback, boiler suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems or with power ranging between 8000 and 20000 kW and work temperatures between 60 and 100 °C. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eDesigned for 110°C maximum temperature (available for 10 bar designed pressure).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Direct\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods horizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, without helical turbulators\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke tubes welded to tube plates, without turbulators\u003c\/li\u003e\n\u003cli\u003eFront smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and drilled plate for burner insertion\u003c\/li\u003e\n\u003cli\u003eRear smoke box made from steel sheet, thermally insulated with refractory materials \u003cspan style=\"line-height: 1.4em;\"\u003ewith a high aluminium content equipped with two flat separated doors, equipped \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003ewith cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing - support built form carbon steel sections able to support the entire unit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above \u003cspan style=\"line-height: 1.4em;\"\u003ethe boiler\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52387285631315,"sku":"HICITNXEN","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNXEN___L.jpg?v=1763204057"},{"product_id":"hicirex-dual","title":"ICI Caldaie Rex Dual","description":"\u003cp\u003eREX DUAL \u003cspan style=\"text-decoration: underline;\"\u003estaked\u003c\/span\u003e module steel boiler and REX DUAL \u003cspan style=\"text-decoration: underline;\"\u003eside by side\u003c\/span\u003e module steel boiler, cylindrical dual combustion chamber with reverse flame, completely closed round posterior side supported by a completely submerged nozzle. Connectible to pressure air jet burner for gas or liquid fuel operation. Used in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 °C)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoiler body built from high quality steel, made from front tube sheet turned towards the combustion chamber using RSB procedures and from convex rear plate (rather than a flat surface for a better resistance internal pressure) with laser drilled holes.\u003c\/li\u003e\n\u003cli\u003eCylindrical revers flame combustion chamber, with the rear side completely sealed off by a convex bottom supported by a submerged nozzle; the flame presenting itself in the central part of the chamber, while hot gases return to the lower part of the partially submerged chamber. Hot gases will be conveyed through the tube bundle.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates, fitted with special helical turbulators.\u003c\/li\u003e\n\u003cli\u003ePosterior fume box manufactured from thermal insulated steel sheets, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003cli\u003eBoiler casing equipped with system and working device connections, all manufactured with approved welding procedures and qualified personnel.\u003c\/li\u003e\n\u003cli\u003eHigh density, glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eSteel sheet, fibre-ceramic, thermal insulated, reversible rear door, mounted on hinges, easily opened with equipped lever by drilled ferrules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52400920559955,"sku":"HICIREX Dual","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIREX_20DUAL___L.jpg?v=1763371819"},{"product_id":"de-dietrich-mca45-65-90-115","title":"De Dietrich Mca45\/65\/90\/115","description":"\u003cp class=\"Default\"\u003eDe Dietrich MCA45\/65\/90\/115\/160 range of wall-hung commercial condensing boilers, equipped to operate on natural gases and can be converted to propane. With minimum floor space for maximum output, the Innovens Pro MCA is a high-technology wall-hung gas condensing boiler that offers a boiler output range of 8.9kW to 1\u003cspan\u003e61.5\u003c\/span\u003e\u003cspan\u003ekW, optimised for energy savings and ecology. A system that is complete, flexible and intelligent, the Innovens Pro MCA can be customised to provide domestic hot water output at high levels of comfort, or installed within a complete hydraulic cascade system to connect 2-10 boilers to offer an output of over 1,292kW.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBoiler Range:\u003cbr\u003eMCA 45:   boiler from   8.9 to 43 kW \u003cbr\u003eMCA 65:   boiler from 13.3 to 65 kW \u003cbr\u003eMCA 90:   boiler from 15.8 to 89.5 kW \u003cbr\u003eMCA 115: boiler from 18.4 to 114 kW \u003cbr\u003e\u003cspan\u003eMCA 160: boiler from 34.6 to 161.5 kW \u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWall-hung gas condensing boiler\u003c\/li\u003e\n\u003cli\u003eEquipped to operate on natural gases and can be converted to propane\u003c\/li\u003e\n\u003cli\u003eGas supply pressure: 20 mbar\u003c\/li\u003e\n\u003cli\u003eForced flue or chimney connection\u003c\/li\u003e\n\u003cli\u003eAnnual operating efficiency up to 110%\u003c\/li\u003e\n\u003cli\u003eLow pollutant emissions: NOx \u0026lt; 37 mg\/kWh for MCA 45,\u003c\/li\u003e\n\u003cli\u003e32 mg\/kWh for MCA 65, 45 mg\/kWh for MCA 90 and\u003c\/li\u003e\n\u003cli\u003e46 mg\/kWh for MCA 115\u003c\/li\u003e\n\u003cli\u003eMono-block heating body in aluminium\/silicium\u003c\/li\u003e\n\u003cli\u003eGas premix burner in stainless steel with a surface in woven metallic fibres, modulating from 18 to 100% of output\u003c\/li\u003e\n\u003cli\u003eFan with air intake silencer\u003c\/li\u003e\n\u003cli\u003eDelivered with integrated automatic air vent, run-off siphon\u003c\/li\u003e\n\u003cli\u003eChoice of one of the following two control panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDIEMATIC iSystem: control panel to control and regulate up to 3 heating circuits + 1 DHW circuit, depending on optional equipment connected, according to the outside temperature. It can also be used to optimise management of combined control system associated with boilers with IniControl (even DIEMATIC iSystem) and control cascades of 2 to 10 boilers.\u003c\/p\u003e\n\u003cp\u003einiControl: for operation either according to outside temperature (sensor optional), or through the 0-10 V contact fitted to this panel as standard. It can also be used as a secondary boiler as part of a cascade installation controlled by a boiler with the DIEMATIC iSystem control panel or in a cascade system in which each boiler is controlled in 0-10 V.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePackaging: 2 packages\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"De Dietrich","offers":[{"title":"Default Title","offer_id":54141490102611,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HDEDIETRICHMCAPRO___2___L_cc3e5204-a6f5-44af-a86c-590538cbfe0e.jpg?v=1782809758"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/collections\/wide_1_82fa2d5b-a31a-42ac-b8d8-82a60cfd8e28.png?v=1774023593","url":"https:\/\/hevac.ie\/collections\/boilers.oembed?page=2","provider":"Hevac Limited","version":"1.0","type":"link"}