{"title":"Hamworthy","description":"","products":[{"product_id":"hhamworthypowerstock","title":"Hamworthy Powerstock","description":"\u003cp\u003eThe Powerstock calorifier delivers imdirect hot water generation with continious high outputs. The twin coil design (models PS300 to PS1000 only) makes it perfect for use with solar thermal solution or other alternative heat sources. Wate Regulations Advisory Scheme (WRAS) approve, they comply with the water supply (water fittings) regulations 1999.\u003c\/p\u003e\n\u003cp\u003eThe Powerstock calorifier range consists of 7 models, with a storage capacities ranging from 157 to 9725 litres and a continious output from 501 l\/h up to 1635 l\/h. Powerstock storage tanks  are available in 4 models with capacities ranging from 301 to 981 litres. All models have a glass lined vessel, a large inspection \/ clean out door and a screwed drain connection.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eCylinders constructed from high grade steel with high quality vitreous enamel lining\u003c\/li\u003e\n\u003cli\u003eCalorifier models PS300 to PS1000 feature twin coils for independent external heat sources\u003c\/li\u003e\n\u003cli\u003eCE and WRAS approved\u003c\/li\u003e\n\u003cli\u003eComplies with Health \u0026amp; Safety Commission (HSC) approved code of practice for the prevention of Legionella\u003c\/li\u003e\n\u003cli\u003eSupplied with pre-wired contol panelwith temperature control and limit thermostat\u003c\/li\u003e\n\u003cli\u003eAdaptable to match load demand\u003c\/li\u003e\n\u003cli\u003eMagnesium sacrificial anode for corrision protection\u003c\/li\u003e\n\u003cli\u003eClean out door for inspection and easy cleaning\u003c\/li\u003e\n\u003cli\u003eFactory fitted polyurethane foam insulation jacket to minimise standby losses\u003c\/li\u003e\n\u003cli\u003eAdjustable feet for easy leveling\u003c\/li\u003e\n\u003cli\u003e10 bar pressure rated\u003c\/li\u003e\n\u003cli\u003eOptional lits for un-vented supply, top to bottom recirculation, electrical anode protetion, and electric immersion heater\u003c\/li\u003e\n\u003cli\u003eParmetric 3D BIM (Building Information Modelling), models for all Powerstock calorifiers are available from Hamworthy's website: \u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" rel=\"noopener\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351036883283,"sku":"HHamworthyPowerstock","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYPOWERSTOCK___L.jpg?v=1762863678"},{"product_id":"hhamworthywessex","title":"Hamworthy Wessex Modumax","description":"\u003cp\u003eWessex ModuMax is a compact, floor standing, high efficiency condensing boiler range with up to 95% gross seasonal efficiency.\u003c\/p\u003e\n\u003cp\u003eAll models feature the latest fully modulating burner technology with 100% to 20% modulation on each module, and hot surface ignition with 120V power transformer.\u003c\/p\u003e\n\u003cp\u003eThe Wessex ModuMax mk3 is available in individual condensing boiler modules of 97 kW, 116 kW, 147 kW, 196 kW and 254 kW and in a choice of one, two or three-modules high pre-assembled boiler stacks, giving 15 combinations of like powered modules. This effectively offers 13 output power options ranging from 97 kW up to 762 kW.\u003c\/p\u003e\n\u003cp\u003eThe heat exchanger is manufactured in high grade stainless steel to provide protection against condensate and corrosion. Each module is designed to operate continuously at up to 40 °C delta T differential temperature rise across the module, maximising condensing operation. The mk3 upgrade of the boiler has been developed in direct response to the increased use of wider delta T design methodologies in commercial buildings and district heating systems.\u003c\/p\u003e\n\u003cp\u003eWessex ModuMax mk3 boilers feature modern controls and use a LPB (Local Process Bus) communication system. Clip-in modules allow boiler controls to be integrated with building control systems. Sequencing for up to 16 boilers in a multiple boiler installation is achievable via Merley sequence controller option, or by using the built in master\/slave cascade control.\u003c\/p\u003e\n\u003cp\u003eCompleting the Wessex ModuMax package is a range of optional pipe kits that simplify design and installation. The variety of kits is available for 2 or 3 modules and factory tested and assembled for ease of installation.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eHigh efficiency, compact condensing boiler with up to 95% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eSpace saving design (\u0026lt;1m² of floor space) with stacking modules two or three high\u003c\/li\u003e\n\u003cli\u003eLightweight, ideal for roof top or packaged plant rooms\u003c\/li\u003e\n\u003cli\u003eLow water content to enable rapid response to heat demand\u003c\/li\u003e\n\u003cli\u003eFully modulating burner for close load matching\u003c\/li\u003e\n\u003cli\u003eUltra-low standing losses (\u0026lt;1%)\u003c\/li\u003e\n\u003cli\u003eOptional pipe kits to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eRange of control options for complete system integration\u003c\/li\u003e\n\u003cli\u003eDesigned for 10 bar water pressure\u003c\/li\u003e\n\u003cli\u003eWatertight combustion chambers to retain condensate\u003c\/li\u003e\n\u003cli\u003eTri-lip silicone seal fitted to flue connections\u003c\/li\u003e\n\u003cli\u003eEuropean Class 5 performance for NOx emissions (\u0026lt;40mg\/kWh)\u003c\/li\u003e\n\u003cli\u003eOptional volt free contacts and 0-10V signal standard on all models\u003c\/li\u003e\n\u003cli\u003eDelivered fully assembled and can pass through standard doorway\u003c\/li\u003e\n\u003cli\u003eLPG and natural gas compatible options\u003c\/li\u003e\n\u003cli\u003eBMS compatible\u003c\/li\u003e\n\u003cli\u003eParametric 3D BIM (Building Information Modelling) models for all Wessex ModuMax mk3 boilers are available from Hamworthy website: \u003cbr\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e\u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037014355,"sku":"HHamworthyWessex","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYWESSEX___L.jpg?v=1762863680"},{"product_id":"hhamworthypurewell","title":"Hamworthy Purewell Variheat","description":"\u003cp\u003eThe Purewell VariHeat is a cast iron condensing boiler that combines traditional durable build quality with modern ultra-efficient condensing boiler technology. The range consists of 5 models with outputs from 70 kW to 180 kW. The highly reliable cast iron heat exchanger is backed by Hamworthy 10-year cast iron warranty for additional peace of mind. The fully Energy-related Products Directive (ErP) compliant cast iron boiler is the only one of its kind in the UK. It achieves exceptional gross seasonal efficiency up to 96% with ultra-low emissions (European Class 5), while easily exceeding minimum seasonal efficiency requirements for new and existing buildings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallable as single or multiple boilers in modular arrangement, they are ideal to replace atmospheric boilers in existing heating systems. Thanks to modern controls and clip-in modules, the boilers can be integrated in building control systems. Additionally, the boiler can be installed with an optional cascade controller with reliable bus communications for boiler sequencing for up to 16 boilers.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eReliable and robust cast iron heat exchanger with 10-year warranty \u003cem\u003e(primary \u0026amp; secondary heat exchanger only, T\u0026amp;Cs apply)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eExceptionally efficient condensing technology with up to 108% net efficiency\u003c\/li\u003e\n\u003cli\u003eFully modulating boiler for close control and accurate load matching\u003c\/li\u003e\n\u003cli\u003eOnly ErP compliant cast iron commercial condensing boiler in the UK\u003c\/li\u003e\n\u003cli\u003eUltra-low NOx performance\u003c\/li\u003e\n\u003cli\u003eTolerant of older heating systems, replaces atmospheric boilers easily\u003c\/li\u003e\n\u003cli\u003eReduced cost of refurbishment\u003c\/li\u003e\n\u003cli\u003eComprehensive controls including optional boiler sequencing\u003c\/li\u003e\n\u003cli\u003eFull factory assembled for easier installation but for plant rooms with difficult access it can be supplied unassembled\u003c\/li\u003e\n\u003cli\u003ePipe kits available to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eParametric 3D BIM (Building Information Modelling) models for all Purewell VariHeat boilers are available from Hamworthyâ website:\u003cbr\u003e\u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" rel=\"noopener\" style=\"font-size: 12.8px;\" target=\"_blank\"\u003ehttp:\/\/hamworthy-heating.com\/building-information-modelling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePipe kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo simplify design and procurement, Hamworthy provide a range of pipe kits for 2, 3 or 4 multiple boilers, which are factory tested and part assembled for ease of installation. The kits include:\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eIsolating ball valves for water flow, return and gas inlet connection on each boiler\u003c\/li\u003e\n\u003cli\u003eFlow and return headers\u003c\/li\u003e\n\u003cli\u003ePre-assembled flow and return pipe sub-assemblies between boilers and headers.\u003c\/li\u003e\n\u003cli\u003eFlow line safety relief valve and ½\" connection for pressure gauge\u003c\/li\u003e\n\u003cli\u003eReturn line drain valve and ½\" connection for expansion vessel in line with BS6644\u003c\/li\u003e\n\u003cli\u003eBlanking flanges for header ends\u003c\/li\u003e\n\u003cli\u003eSupport legs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037440339,"sku":"HHamworthyPurewell","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYPUREWELL___L.jpg?v=1762863682"},{"product_id":"hhamworthyupton","title":"Hamworthy Upton","description":"\u003cp\u003e\u003cstrong\u003eHAMWORTHY UPTON\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpton floor standing condensing modular boiler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eThe Upton is an ErP-compliant floor standing condensing modular boiler able to deliver an output of over 1MW from less than 1m² of footprint. It features a precision-engineered and resilient aluminium heat exchanger with quick heat up times and a gross seasonal efficiency of up to 97%. The boiler is available in 6 stackable modules with a turndown ratio of 5:1 with outputs ranging from 98 up to 348kW output. Single modules can be stacked vertically allowing up to 18 boiler module combinations. If stacked, the boiler turndown ratio increases from 5:1 to 15:1 for more accurate load matching and less energy wastage. All boiler modules benefit from identical water and gas connections (size and position) which allows for easy design changes if more output is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTogether with the Upton low NOx emissions (\u0026lt;40 mg\/kWh) and low noise levels, it is an ideal choice for restricted access city centre plant rooms or adjoining quiet areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe boiler modules can be stacked 1-, 2- or 3-high which offers flexible installation options for more challenging plant rooms. The built-in modern Siemens LMS platform allows control of cascade arrangements of up to 16 boiler modules.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eTested 6 bar rated precision-engineered aluminium heat exchanger with 5-year warranty\u003c\/li\u003e\n\u003cli\u003eUp to 97% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eOver 1MW output from less than 1m² of footprint\u003c\/li\u003e\n\u003cli\u003eFully modulating with a turndown ratio of 5:1 per module for accurate load matching\u003c\/li\u003e\n\u003cli\u003eLow NOx emissions (\u0026lt;40mg\/kWh)\u003c\/li\u003e\n\u003cli\u003eBuilt-in advanced sequence control for cascade arrangements of up to 16 boiler modules\u003c\/li\u003e\n\u003cli\u003eCombustion analysis and drain point at front of the boiler for easy servicing and system cleaning\u003c\/li\u003e\n\u003cli\u003eBoiler modules easy to separate and transport to point of use, even in difficult to access city centres\u003c\/li\u003e\n\u003cli\u003ePipework kits available to simplify design and installation\u003c\/li\u003e\n\u003cli\u003eOptional low loss header with integrated air and dirt separator for increased system performance available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParametric 3D BIM (Building Information Modelling) models for all Upton boiler models are available from the Hamworthy website: \u003ca href=\"http:\/\/hamworthy-heating.com\/building-information-modelling\" target=\"_blank\"\u003ebuilding-information-modelling\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 12.8px;\"\u003ePipework kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifically designed pipework kits for the Upton are available. These include optional matched boiler pumps and allow cascade installations with an output of up to 4.2MW.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eFour sizes of factory assembled pipework kits available\u003cbr\u003eDN100 (100\/150kW) 12 modules 1.8MW  DN150 (200\/250kW) 12 modules 3.0MW  DN150* (300\/350kW) 6 modules 2.1MW (*with larger pump)  DN200 (300\/350kW) 12 modules 4.2MW\u003c\/li\u003e\n\u003cli\u003eGas manifold\u003c\/li\u003e\n\u003cli\u003eCondensate drain pipework\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eOptional matched pumps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eBoiler safety relief valves\u003c\/li\u003e\n\u003cli\u003eAutomatic air vents\u003c\/li\u003e\n\u003cli\u003eOptional blanking plate with tappings for system safety relief valve and pressurisation unit\u003c\/li\u003e\n\u003cli\u003eOptional low loss header with integrated air and dirt separator\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eOptional 3 port manifold extension\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eBuilt-in advanced Siemens LMS controls as standard\u003c\/li\u003e\n\u003cli\u003eBoiler sequencing cascade controller\u003c\/li\u003e\n\u003cli\u003eRoom \u0026amp; outside temperature sensors\u003c\/li\u003e\n\u003cli\u003eLPB bus communications modules\u003c\/li\u003e\n\u003cli\u003eDHW cylinder sensor kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037505875,"sku":"HHAMWORTHYUPTON","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYUPTON___L.jpg?v=1762863683"},{"product_id":"hhamworthyvarmax","title":"Hamworthy Varmax","description":"\u003cp\u003e\u003cstrong\u003eVarmax boiler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Varmax is a high output floor standing condensing boiler. A stainless steel fully welded heat exchanger makes it extremely tolerant to a wide range of system water conditions and gives it a long life.\u003c\/p\u003e\n\u003cp\u003eWith outputs ranging from 120kW to 637kW for single boilers, the Varmax boiler, featuring twin return connections, is ideally suited for split temperature systems and projects such as medium sized district heating schemes. Additional to 96% gross seasonal efficiency for cost-effectiveness, generous insulation assures standby losses are kept to a minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12.8px;\"\u003eNew larger models added November 2020\u003c\/span\u003e\u003cspan style=\"font-size: 12.8px;\"\u003e - The range consists of 10 single boilers with outputs (at 50\/30°C) of 127, 148, 191, 238, 290, 338, 415, 478, 558, 637kW.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high water capacity of the heat exchanger and being non-dependent on system flow allows operation with wide differential temperatures. This makes the Varmax not only efficient, but removes the need for a dedicated primary circuit, simplifying system design.\u003c\/p\u003e\n\u003cp\u003e5:1 turndown of the premix burners allows accurate load-matching to supply only the heat that is required. Along with a NOx emission lower than 40mg\/kWh, it far exceeds Energy Related Products Directive (ErP) criteria. A built-in flue gas non-return valve allows for easier flue system design whilst protecting from re-circulation of flue gases through non-firing boilers.\u003c\/p\u003e\n\u003cp\u003eComprehensive built in controls can manage multiple heating systems including domestic hot water cylinder and up to three independent heating circuits operating at different temperatures to one another. Multiple boiler control is possible without the need for an additional sequence control panel.\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eDurable corrosion resistant stainless steel heat exchanger backed up by 5-year heat exchanger warranty (\u003cem\u003eT\u0026amp;Cs apply\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003eTolerant to a wide range of water conditions\u003c\/li\u003e\n\u003cli\u003eUp to 96% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eClose load matching with 5:1 turndown ratio\u003c\/li\u003e\n\u003cli\u003eLow environmental impact with NOx emissions \u0026lt;40mg\/kWh\u003c\/li\u003e\n\u003cli\u003eIdeal for medium sized district heating schemes and split temperature systems\u003c\/li\u003e\n\u003cli\u003eBuilt in Siemens controls platform with sequence control for up to 16 boilers, multiple heating circuits and hot water circuit using the master\/slave principle\u003c\/li\u003e\n\u003cli\u003eReversible control panel and quick release panels simplify service and maintenance\u003c\/li\u003e\n\u003cli\u003eNatural gas or LPG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptions\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eA large range of off the shelf flue options available\u003c\/li\u003e\n\u003cli\u003eRoom sealed and open flue solutions\u003c\/li\u003e\n\u003cli\u003eFlue header kits\u003c\/li\u003e\n\u003cli\u003eUnvented kits \u003c\/li\u003e\n\u003cli\u003eSingle and multiple boiler controls\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351037604179,"sku":"HHAMWORTHYVARMAX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYVARMAX___L.jpg?v=1762863684"},{"product_id":"hhamworthystratton","title":"Hamworthy Stratton","description":"\u003cp\u003e\u003cstrong\u003eStratton Mk2 - Wall Hung, Pre-Mix Gas Fired Modular Boilers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe new Stratton mk2 wall hung condensing boiler offers exceptional system tolerance with a highly durable stainless steel heat exchanger at the heart. Suitable for use with natural gas and LPG this boiler can be specified for a multitude of commercial wall hung boiler applications.\u003c\/p\u003e\u003cp\u003eAn extensive product range of 7 models with outputs from 40kW to 150kW enables you to choose the most appropriate boiler to meet the building heat load. A superb 5:1 turndown ratio per boiler module means any changes in system load are accurately matched. This minimises boiler cycling and wastage of energy. Outstanding efficiency in excess of 108% nett keeps operating costs to a minimum, and the pre-mix burner technology gives clean operation with ErP Class 6 NOx emissions.\u003c\/p\u003e\u003cp\u003eThe boiler is protected from operating during adverse system conditions thanks to built-in monitoring of low water pressure and flow rate.\u003c\/p\u003e\u003cp\u003eThe Stratton mk2 wall hung boiler can be installed with both room sealed and open flue arrangements. Pre-defined flue headers for up to 4 boilers, plus off the shelf flue solutions for single boilers help simplify installation.\u003c\/p\u003e\u003cp\u003eDesigned for sealed and pressurised systems only, the hydraulic installation can be fast tracked using factory manufactured frame and header kits that include boiler pumps for up to 4 boilers.\u003c\/p\u003e\u003cul data-mce-style=\"list-style-type: disc;\" style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eDurable corrosion resistant stainless steel heat exchanger backed up by 5-year heat exchanger warranty (\u003cem\u003eT\u0026amp;Cs apply\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003eUp to 96% gross seasonal efficiency\u003c\/li\u003e\n\u003cli\u003eAccurate load matching with 5:1 turndown ratio to prevent wasting energy\u003c\/li\u003e\n\u003cli\u003eFully modulating for greater efficiency\u003c\/li\u003e\n\u003cli\u003e7 models with outputs from 40kW to 150kW\u003c\/li\u003e\n\u003cli\u003eLow NOx emissions (\u0026lt;40mg\/kWh, ErP Class 6)\u003c\/li\u003e\n\u003cli\u003eEasy transport thanks to lightweight heat exchanger\u003c\/li\u003e\n\u003cli\u003eSpace saving flue arrangement thanks to concentric flue connector and integral flue gas non return valve\u003c\/li\u003e\n\u003cli\u003eSuited to low ceiling height plant rooms (\u0026lt;2.2 metres to top of flue header when mounted on low height pipe kit)\u003c\/li\u003e\n\u003cli\u003eIntegral boiler sequence controller\u003c\/li\u003e\n\u003cli\u003ePre-defined flue headers for up to 4 boilers, plus off the shelf flue solutions for single boilers for simplified installation\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install with optional pipe kits for up to 4 boilers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-mce-style=\"list-style-type: disc;\" style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eSingle and multiple boiler controls\u003c\/li\u003e\n\u003cli\u003eBoiler sequencing cascade controller\u003c\/li\u003e\n\u003cli\u003eNatural gas or propane\u003c\/li\u003e\n\u003cli\u003ePipe kits and low loss header\u003c\/li\u003e\n\u003cli\u003eSupport frame kit\u003c\/li\u003e\n\u003cli\u003eFlue header kits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamworthy","offers":[{"title":"Default Title","offer_id":52351043797331,"sku":"HHamworthyStratton","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HHAMWORTHYSTRATTON___L.jpg?v=1762863705"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/collections\/news-Hamworthy-news___3.jpg?v=1782466678","url":"https:\/\/hevac.ie\/collections\/hamworthy.oembed","provider":"Hevac Limited","version":"1.0","type":"link"}