{"title":"Medium Temperature Hot Water","description":"","products":[{"product_id":"hicigreenox","title":"ICI Caldaie Greenox.E","description":"\u003cp\u003eThe GREENOx boiler is three pass, wet back, low thermal load generator, with passing flame combustion chamber, connectible to pressure air blast burners with gaseous fuel operation. The boiler is designed to be used in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 °C). 3 stars classification\u003c\/p\u003e\n\u003cp\u003eaccording to 92\/42\/EEC directive in compliance with 192\/05 and 311\/06 Legislative Decree requirements.\u003c\/p\u003e\n\u003cp\u003eStainless steel boiler body\u003c\/p\u003e\n\u003cp\u003eLarge volume combustion chamber for low heat load obtainment with front gas convey pass, passing flame, three pass, wet back horizontal combustion chamber (sustained by a completely submerged nozzle)\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eLaser cut tube plate holes.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates, fitted with special helical turbulators.\u003c\/li\u003e\n\u003cli\u003eBoiler casing with flow and return flanged connections, working device connections, inspection doors, all manufactured with approved welding procedures.\u003c\/li\u003e\n\u003cli\u003eHigh density, thick glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eFlat front door with reversible opening, inner high-insulating ceramic casing, pivoting on hinges, easily opened by perforated rings equipped with levers as to guarantee a perfect combustion gas seal and allow possible maintenance operations.\u003c\/li\u003e\n\u003cli\u003eFlat front door (with reversible opening for GREENOx.e 80 e GREENOx.e 90 models), inner high-insulating ceramic casing, pivoting on hinges, easily opened by perforated rings equipped with levers as to guarantee a perfect combustion gas seal and render possible service operations.\u003c\/li\u003e\n\u003cli\u003eFlat rear door, manufactured in high quality steel as to guarantee high heat resistance, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037735251,"sku":"HICIGREENOx","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIGREENOX___L.jpg?v=1762863685"},{"product_id":"hicimonolitegt","title":"ICI Caldaie Monolite Gt","description":"\u003cp\u003eAISI 316 Ti stainless steel, passing flame combustion chamber, vertical heat exchanger, condensing MONOLITE GT Boiler is able to produce hot water with a maximum temperature of 100 °C. Equipped with pre-mix, gas fuel burner with cylindrical, heat radiating body with low NOx emissions. In compliance with directives 90 \/396\/CEE (gas) - CEE 311\/06 (efficiency) label, 89 \/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e \u003cspan style=\"line-height: 1.4em;\"\u003eFrame composed out of steel vertical profile structure, complete with floor support.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eLarge cylindrical combustion chamber manufactured from AISI 316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eAISI 316 Ti anti acid stainless steel, vertical heat exchange surfaces, TIG welded, attached perpendicularly to the combustion chamber, consisting of stainless steel plates printed with special conformity specifications in order to increase heat exchange surface, and facilitate condensate droplet formation, allowing adequate drainage. Heat exchange surface vertical arrangement also facilitates condensate drainage, ensuring an effective plate self-cleaning function.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eWelding carried out with TIG method, method which does not require weld material, and therefore guarantees stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eFlanged supply connection and two system return connections for boiler differential temperature input and ensure minimum possible temperature in lowest point of the condensation curve and then take maximum advantage from the condensation process even in the presence of medium-high temperature returns.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eSmoke chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eHigh water content and low thermal load.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003ePre-mix, modulating, radiating burner, power modulation between minimum and maximum power depending on instantaneous heat load requirement; allows maximum acoustic comfort and low pollutant emissions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037800787,"sku":"HICIMONOLITEGT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIMONOLITEGT___L.jpg?v=1762863686"},{"product_id":"hicirexf","title":"ICI Caldaie Rex F","description":"\u003cp\u003eREX 7F-130F and REX 140F-350F steel boiler, cylindrical combustion chamber with reverse flame, completely closed round posterior side supported by a completely submerged nozzle. Connectible to pressure air jet burner for gas fuel operation. The boiler is designed to be used in systems with water temperature between 60 and 100 °C (safety thermostat set at 110 °C). 3 stars classification according to 92\/42\/EEC directive in compliance with 192\/05 and 311\/06 Legislative Decree requirements.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoiler body built from high quality steel, made from front tube sheet turned towards the combustion chamber using RSB procedures and from convex rear plate (rather than a flat surface for a better resistance internal pressure), with laser cut holes.\u003c\/li\u003e\n\u003cli\u003eCylindrical revers flame combustion chamber, with the rear side completely sealed off by a convex bottom supported by a submerged nozzle; the flame presenting itself in the central part of the chamber, while hot gases return to the lower part of the partially submerged chamber. Hot gases will be conveyed through the tube bundle.\u003c\/li\u003e\n\u003cli\u003eEN10217-2 P235GH smoke ducts welded to tube plates - internally finned extruded aluminium (Fin-eR), pressure-fitted to the rear part of the boiler tubes smoke as to ensure full surface contact.\u003c\/li\u003e\n\u003cli\u003ePosterior fume box manufactured from thermal insulated steel sheets, constructed in one piece that can be easily opened and that allows smoke duct inspections, fastened with bolts, equipped with chimney connection and cleaning door.\u003c\/li\u003e\n\u003cli\u003eBoiler casing equipped with system and working device connections, all manufactured with approved welding procedures and qualified personnel.\u003c\/li\u003e\n\u003cli\u003eHigh density, glass wool mattress insulation, protected by easily removable, varnished steel panels.\u003c\/li\u003e\n\u003cli\u003eSteel sheet, fibre-ceramic, thermal insulated, reversible rear door (only for models up to REX 180, last one being included), mounted on hinges, easily opened with equipped lever by drilled ferrules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037931859,"sku":"HICIREXF","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIREXF___L.jpg?v=1762863686"},{"product_id":"hicistelt","title":"ICI Caldaie Stelt","description":"\u003cp\u003eSTELT condensing boiler, made from AISI 316 Ti stainless steel with revers flame combustion chamber able to produce hot water at a maximum temperature of 100 °C. Connectible to air injected burners operating on gaseous fuels. According to 90\/36\/CEE (gas) directive, CE 311\/06 (efficiency) label, 89 \/366\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInclined boiler body for condensate drainage support\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber with reversed flame composed out of AISI\u003c\/li\u003e\n\u003cli\u003e316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/li\u003e\n\u003cli\u003eStainless steel fuel passage with special profiles, placed inside the combustion chamber in order to extend fume development and consequently increase heat exchange, or increase boiler efficiency (and obtain low NOx emissions in conjunction with Low NOx burners)\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eWelded using TIG, MIG and plasma procedures, methods that guarantee stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/li\u003e\n\u003cli\u003eFlanged delivery connection and two systems return connections for boiler differential input and ensure minimum possible temperature and take advantage of condensation benefits even in case of medium-high temperature returns.\u003c\/li\u003e\n\u003cli\u003eFlue gas chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/li\u003e\n\u003cli\u003eBurner mounting plate, for attaching pressure jet burners for gaseous fuels use.\u003c\/li\u003e\n\u003cli\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351037997395,"sku":"HICISTELT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICISTELT___L.jpg?v=1762863687"},{"product_id":"hicisteltd","title":"ICI Caldaie Stelt Dual","description":"\u003cp\u003eAISI 316 Ti stainless steel, dual stacked boilers, reverse flame condensing. STELT DUAL Boiler is able to produce hot water with a maximum temperature of 100 °C. To be fitted with pressure jet burner for gas fuel operation In compliance with directives 90 \/396\/CEE (gas) - CE 311\/06 (efficiency) label, 89 \/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einclined boiler body for condensate drainage support\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber with reversed flame manufactured out of AISI 316 Ti stainless steel, TIG pulse welded, able to withstand acid condensate attack.\u003c\/li\u003e\n\u003cli\u003eStainless steel flue passage with special profiles, placed inside the combustion chamber in order to extend flue gas development and consequently increase heat exchange, or increase boiler efficiency (and obtain low NOx emissions in conjunction with Low NOx burners)\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eWelded using TIG, MIG and plasma procedures, methods that guarantee stainless steel main mechanical characteristics, without sacrificing corrosion resistance to acid condensation.\u003c\/li\u003e\n\u003cli\u003eFlanged delivery connection and two system return connections for boiler differential input and ensure minimum possible temperature in lowest point of the condensation curve and then take maximum advantage from the condensation process even in the presence of medium-high temperature returns.\u003c\/li\u003e\n\u003cli\u003eSmoke chamber able to collect resulted condensate and discharge it through a water trap connected to a neutralizer (where provided) to the domestic water drainage system.\u003c\/li\u003e\n\u003cli\u003eBurner mounting plate, connectible to pressure jet burners with gaseous fuels use.\u003c\/li\u003e\n\u003cli\u003eHeat dispersion surface insulation with thick glass wool mattress, protected with steel varnished panels that can be easily removed - front door with reversible steel sheet opening thermally insulated with ceramic fibre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351038062931,"sku":"HICISTELTD","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICISTELTD___L.jpg?v=1762863688"},{"product_id":"hicitnoxe","title":"ICI Caldaie Tnox.E Mthw (2500-6000)","description":"\u003cp\u003eTNOX.e (2500-6000)\u003cbr\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree pass, wet back boiler, suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems with duties ranging between 2500 and 6000 kW and temperatures higher than 100 °C. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIt also features heat exchange acceleration elements to ensure highest possible efficiency of its category. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eDesigned for 110°C maximum temperature (available for 10 bar designed pressure). \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003e-Horizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, endowed with special turbulence inductors designed and dimensioned in order to ensure stated efficiency achievement.\u003c\/li\u003e\n\u003cli\u003eSteel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control.\u003c\/li\u003e\n\u003cli\u003eInsulated steel sheet posterior smoke box equipped with an easily opened door\u003c\/li\u003e\n\u003cli\u003ecan be removed using equipped bolts using brass bolts in order to clean the smoke pipes; provided with cleaning door and chimney connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039340883,"sku":"HICITNOXe","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXE___L.jpg?v=1762863688"},{"product_id":"hicibxsteam","title":"ICI Caldaie Bx Steam","description":"\u003cp\u003eThe ICI Caldaie Model BX is a three pass reverse flame wet back boiler specifically designed for operation at 1 bar g. only. The steam dome on top of the shell increase the steam space volume as well as the distance between the evaporating surface and the steam outlet connection, resulting in high quality dry steam in spite of the low pressure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied fully packaged and ready for installation\u003c\/li\u003e\n\u003cli\u003eQuality dry steam owing to large steam space and steam drum\u003c\/li\u003e\n\u003cli\u003eFull stainless steel casing for food or sanitary applications\u003c\/li\u003e\n\u003cli\u003eStandby feed pump as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/index.php?section=122\" title=\"Riello Burner Selector\" target=\"_blank\"\u003eRiello - Burner Selector Link\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_oil.htm\" title=\"Riello Oil Burner Selection Tool\" target=\"_blank\"\u003eRiello Oil Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_gas.htm\" title=\"Riello Gas Burner Selection Tool\" target=\"_blank\"\u003eRiello Gas Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.rielloburners.co.uk\/burnerselector\/burnerselector_dualfuel.htm\" title=\"Riello Dual Fuel Burner Selection Tool\" target=\"_blank\"\u003eRiello Dual Fuel Burner Selection Tool\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039373651,"sku":"HICIBXSTEAM","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIBXSTEAM___L.jpg?v=1762863689"},{"product_id":"hicicodex","title":"ICI Caldaie Codex","description":"\u003cp\u003eCODEX, three pass boilers, can be connected to pressure jet burners with gas fuel operation, able to produce hot water at a maximum temperature of 100 °C. In compliance with directives 90 \/396\/CEE (gas) - CE 311\/06 (efficiency) label, 89\/336\/CEE (electromagnetic compatibility), 72\/23\/CEE (low voltage).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSome of the product’s main features are related below:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrame composed out of steel vertical profile structure, complete with floor support.\u003c\/li\u003e\n\u003cli\u003ePanted boiler body characterized by a horizontal axis and gas ducts with a large cross-section parallel to the furnace and a different extension.\u003c\/li\u003e\n\u003cli\u003eLarge cylindrical combustion chamber made of AISI 316 Ti (steel strongly bonded to rich chromium, nickel and titanium), welded with TIG method in order to withstand acid condensate attacks.\u003c\/li\u003e\n\u003cli\u003eHeat exchange surfaces made from AISI 316 Ti stainless steel, welded with TIG method, consisting of stainless plates characterized by a particular corrugated shape being able to increase heat exchange surface, and facilitate droplet condensate formation allowing adequate drainage.\u003c\/li\u003e\n\u003cli\u003eTwo system return connections:\u003c\/li\u003e\n\u003cli\u003eLow temperature (underfloor heating, radiators with large heat exchange surface, etc.\u003c\/li\u003e\n\u003cli\u003eMedium\/high temperature (water heater, towel rail radiator, common radiators)\u003c\/li\u003e\n\u003cli\u003eCondensate and gas collection box complete with chimney connection, made of AISI 316 Ti stainless steel.\u003c\/li\u003e\n\u003cli\u003eHigh water content and low thermal load.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039504723,"sku":"HICICODEX","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICICODEX___L.jpg?v=1762863690"},{"product_id":"hicitnoxbt","title":"ICI Caldaie Tnox Bt Condensing","description":"\u003cp\u003e\u003cstrong\u003eTNOX BT COND\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSteel heat generator with 3 smoke ways, wetback, with integrated condensing unit serial connected to the generator, suitable for gaseous fuel pressurized combustion, intended for large heating systems with power ranging between 3500 and 7000 kW and operating temperatures between 40 and 100 °Designed for a security maximum temperature of 110°C. In compliance with EN303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003eHorizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts welded to tube plates, possibly fitted with helical turbulators, manufactured with a double tube and differentiated contact with non-condensing feature (minimum temperature return 35 °C) - condensing heat recovery unit to integrated in the rear part of the generator with thermal exchange sections consisting in AISI 316 Ti stainless steel plates, printed with patented shape, allowing the formation and drainage of condensate\u003c\/li\u003e\n\u003cli\u003eHydraulic manifold for series connection between condenser and generator, complete with expansion joint\u003c\/li\u003e\n\u003cli\u003eSingle steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control\u003c\/li\u003e\n\u003cli\u003ePosterior smoke chamber made from sheet AISI 316 Ti stainless steel, can be dismantled using the bolts; equipped with condensate drain coupling and exhaust connection\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, adequate thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test for each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039537491,"sku":"HICITNOXBT","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXBT___L.jpg?v=1762863690"},{"product_id":"hicitnoxen","title":"ICI Caldaie Tnox En Mthw (7000-17000)","description":"\u003cp\u003e\u003cstrong\u003eTNOX EN (7000-17000)\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eThree pass, wetback, boiler suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems or with power ranging between 7000 and 17000 kW and work temperatures between 60 and 100 °C. \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eDesigned for 110°C maximum temperature (available for 10 bar designed pressure). \u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003eIn compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods - horizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, without helical turbulators - front smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and drilled plate for burner insertion\u003c\/li\u003e\n\u003cli\u003eRear smoke box made from steel sheet, thermally insulated with refractory materials with a high aluminium content equipped with two flat separated doors, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eEquipped with accessories needed for automatic operation with mechanical and hydraulic assembly of all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351039668563,"sku":"HICITNOXEN","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXEN___L.jpg?v=1762863691"},{"product_id":"hicitnoxeenc","title":"ICI Caldaie Tnox.E En Mthw (7000-17000)","description":"\u003cp\u003e\u003cstrong\u003eTNOX.e EN (7000-17000)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree pass, wetback, boiler suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems or with power ranging between 7000 and\u003c\/p\u003e\n\u003cp\u003e17000 kW and work temperatures between 60 and 100 °C. Designed for 110°C maximum temperature (available for 10 bar designed pressure). In compliance with EN 303 European norm and has a CE label according to 2009\/142\/CE Gas Directive.\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP265GH UNI EN 10028\/2 and P275NH UNI EN 10028\/3 quality steel boiler body welded and tested with approved methods\u003c\/li\u003e\n\u003cli\u003eHorizontal, single pass flame combustion chamber, with possible corrugated section.\u003c\/li\u003e\n\u003cli\u003eWetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.\u003c\/li\u003e\n\u003cli\u003eTube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.\u003c\/li\u003e\n\u003cli\u003ePlate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.\u003c\/li\u003e\n\u003cli\u003eP235GH UNI EN 10216\/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, without helical turbulators\u003c\/li\u003e\n\u003cli\u003eFront smoke box made from steel sheet, thermally insulated with refractory materials with high aluminium content, equipped with two flat separated doors, lined in ceramic fibre and rotating on a double-jointed hinges; complete with refractory cone and drilled plate for burner insertion\u003c\/li\u003e\n\u003cli\u003erear smoke box made from steel sheet, thermally insulated with refractory materials\u003c\/li\u003e\n\u003cli\u003eWith a high aluminium content equipped with two flat separated doors, equipped with cleaning hatch, chimney connection, buffer for access to the combustion chamber, light flame with guillotine closing\u003c\/li\u003e\n\u003cli\u003eSupport built form carbon steel sections able to support the entire unit.\u003c\/li\u003e\n\u003cli\u003eEmbossed metal sheet upper walkway for accessories service, parts located above the boiler\u003c\/li\u003e\n\u003cli\u003eHigh density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.\u003c\/li\u003e\n\u003cli\u003eAccessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.\u003c\/li\u003e\n\u003cli\u003eElectrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351040553299,"sku":"HICITNOXeENC","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICITNOXEENC___L.jpg?v=1762863691"},{"product_id":"hiciwall","title":"ICI Caldaie Wall","description":"\u003cp\u003eWALL condensing boiler, with both European and Italian Patent designed by ICI Caldaie for high power in contained spaces. Particular boiler geometry together with large heat exchange surfaces allow considerable \u003cspan style=\"line-height: 1.4em;\"\u003efume temperature reduction resulting in 109% efficiency achievement (referring to PCI and Temp. Delivery\/Return 50\/30 °C). Latest concept burner, 20% to 100% Nominal Power pre-mix flame modulation. Reduced environmental impact achieved by under 10 ppm NOx emissions.\u003c\/span\u003e\u003cspan style=\"line-height: 1.4em;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge Combustion Chamber, passing flame with dry and low thermal load reversal chamber\u003c\/li\u003e\n\u003cli\u003eCrossed groove, W stainless steel, high concentration fume duct\u003c\/li\u003e\n\u003cli\u003eReverse double slope structure for condensate integral recovery, high and low temperature double return.\u003c\/li\u003e\n\u003cli\u003eParts in contact with combustion products - combustion chamber and gas plates - are entirely made out of AISI 316 Ti titanium stabilized stainless steel.\u003c\/li\u003e\n\u003cli\u003eCascade operation in advance setup with 125 kW and 150 kW modules having a maximum of 4 boilers, reaching a maximum power of 600 kW reached using condensing operation.\u003c\/li\u003e\n\u003cli\u003eModulating gas burners with total gas pre-mix, heat radiating cylindrical body, low NOx emission (below 10 ppm)\u003c\/li\u003e\n\u003cli\u003e20 to 100% maximum power adjustment.\u003c\/li\u003e\n\u003cli\u003e109% COP (coefficient of performance), 50\/30°C boiler water temperature\u003c\/li\u003e\n\u003cli\u003eEach module is equipped with a digital control panel for burner modulation management and climatic compensation for fluctuating temperature.\u003c\/li\u003e\n\u003cli\u003eAISI 316 L STAINLESS STEEL external casing, internally insulated with high density, thick mineral wool mattress.\u003c\/li\u003e\n\u003cli\u003eIPX4D protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICI Caldaie","offers":[{"title":"Default Title","offer_id":52351040651603,"sku":"HICIWALL","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/files\/HICIWALL___L.jpg?v=1762863692"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8751\/1891\/collections\/Square_2_65cd0d39-2900-4fd8-b334-cc319c44d922.png?v=1774024325","url":"https:\/\/hevac.ie\/collections\/medium-temperature-hot-water-1.oembed","provider":"Hevac Limited","version":"1.0","type":"link"}